Cisco Systems CP7910GSWRF manual Using Voice Mail section on

Chapter 1 Introduction

Table 1-1 Cisco IP Phone 7910 Series Features (continued)

	Figure	Feature	Description
	Callout
	8, 9, 10, 11,	Programmable	These buttons are programmable by your system administrator. The
15		buttons	options you have depend on what your system administrator
			configured for your phone. This is a list of the available features, with
			the button assignments for the default features. If a button does not
			work according to its label (or does not work at all), ask your
			administrator if the button has been configured.
			• msgs (button 8)—Access your voice mail messages. See the
			“Using Voice Mail” section on page 3-14.
			• conf (button 9)—Initiate a conference call. See the “Placing a
			Conference Call” section on page 3-9.
			• forward (button 10)—Redirect your calls to another telephone
			number. See the “Forwarding All Calls” section on page 3-12.
			• speed dial (buttons 15)—Quickly call a frequently-dialed number.
			See the “Configuring Speed Dial Buttons” section on page 3-14
			for information on setting up speed dials.
			• redial (button 11)—Dial the last number called. See the
			“Redialing the Last Number Dialed” section on page 3-8.
			• park—Store a call at a specified number and then use another
			phone to retrieve the call. See the “Parking a Call” section on
			page 3-8.
			• call pickup—Answer a call that comes in on a telephone
			extension other than your own. See the “Using Call Pickup”
			section on page 3-10.
			• meet-me—Set up a Meet-Me conference, which is a conference at
			a pre-set phone number that is not your own number. See the
			“Establishing Meet-Me Conference Calls” section on page 3-10.
12		Speaker button	Toggles the speaker on and off. See the “Using the Speaker” section
			on page 3-2.
13		Mute button	Toggles the handset mute on and off. See the “Muting a Call” section
			on page 3-7.
			Getting Started with the Cisco IP Phone 7910 Series
	78-11443-02			1-3