Playing Back Recordings
TV Playback or Viewing
Connect Camcorder to a TV to view playback or recordings in progress.
Before you begin...
•Connect Camcorder to power source.
•Make all
Connections
Audio/
Video Out
VCR Playback using PlayPak
1Set POWER to:
VCR ➞ view playback. CAMERA ➞ view picture as it is
recorded.
2Turn TV ON and set to LINE INPUT. See TV owner’s manual.
3Begin playback or recording.
1Load Battery in PlayPak
Remove Battery lid and insert AA battery.
• Do not reverse polarity.
•Replace battery when tape loading/ unloading takes longer than usual.
3Remove 
Cassette
a Slide RELEASE and wait for lid to
open.
b Push cassette out through hole in bottom of PlayPak with your finger.
2Insert 
Cassette in PlayPak
aTurn 
cassette
Tape Wheel in direction of arrow to take up any slack.
b Slide RELEASE to open cassette lid.
c Insert the 
cassette with the window up and on the left, then snap lid shut.
•Do not obstruct cassette reel while loading.
•Allow PlayPak Load Detector to fully retract before using in VHS VCR.
Load Detector
20
For assistance, please call :
