Panasonic PV-L591 STAND-BY Release, CSet Power to Camera DPress RECORD/PAUSE to resume, Recording

Camera Recording

Before you begin...

•Connect Camcorder to power source.

•Insert cassette with record tab (page 11).

2, 3, 4

c
b
a	1,
	b, c,	a, d,
	B A, C	D

Stand-by Quick Release

If left in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand- by mode to conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by pressing RECORD/PAUSE two times. Stand-By Quick Release is set to OFF at the factory.

1Set POWER to CAMERA.

2Press MENU for

MENU mode. Press UP ▲ or DOWN ▼ to select

STAND-BY RELEASE .

3Press DISPLAY to select ON/OFF.

ON : From Stand-by mode, press RECORD/PAUSE two times to resume recording.

OFF : From Stand-by mode,

set POWER to OFF, then to CAMERA. Press RECORD/ PAUSE to record.

4Press MENU to exit.

Basic Operation

Manual Easy Editing

For proper continuity when taping from Stop mode or after attaching a new Battery.

ASet POWER to VCR.

Ba Press REWIND/SEARCH to rewind a few seconds of tape.

bPress PLAY to review recording.

cPress STILL where you want to continue recording.

CSet POWER to CAMERA.

DPress RECORD/PAUSE to resume

recording.

Easy Edit Stand-by

For a smooth transition between scenes if recording is stopped, and then started within 24 hours.

aPress RECORD/PAUSE to stop recording.

b Set POWER to OFF and leave cassette in Camcorder.

cTo resume recording, set POWER to

CAMERA.

d Press RECORD/PAUSE to resume recording.

Note:

•Use Manual Easy Edit (left) if more than 24 hours before recording is resumed.

17