Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20

 

 

 

 

 

User guide

Contents

 

Getting started

 

Making calls

 

Phone book usage

 

In-call features

 

Scheduled meetings

 

Advanced settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sharing contents

Sharing PC contents

General recommendations tips for making your video meeting room as good as possible are described in the Administrator guide for this product. The Administrator guide may be downloaded from www.cisco.com/go/telepresence/docs.

Dual video stream

With dual video stream you can view two different live video streams simultaneously— the main video and one additional source. This could for example be both a PC presentation and the person who gives the presentation.

If a video system does not support dual video stream, no second video stream will be established for this system and the PC presentation will be shown as the main video.

Make sure the PC does not cover your line of sight to any of the microphones. This will reduce the perceived audio quality at the far end.

Locate the DVI cable and connect the PC to the video system. Connect the audio mini-jack output from the PC, or any other source—including Ipod—to the mini-jack socket of the cable to get sound. Connect the RCA connectors to the corresponding sockets on the codec/endpoint.

The default presentation source will be activated when you press the Presentation button (  ) on the remote control, as outlined.

The DVI / VGA input is compliant with VESA Extended Display Identification Data (EDID) and will be able to notify the PC of the supported output formats.

If the shared contents fail to show

Normally you must press a special key combination to switch the PC image from the PC screen to the video screen.

Check that the presentation source is correctly defined. Access to this setting may be password protected by your system administrator. The procedure is described in the Administrator guide for this product.

Make sure your PC is set to activate your VGA output.

Selecting the source

To specify which source to serve as presentation source select it as shown here. Note that the name of each source can be changed, consult your administrator for details on this. All options shown are not available to all systems.

 

HOME

HOME

Call

 

PRESENTATION

 

 

Meetings

 

Secondary camera (no signal)

Meetings

 

 

 

PC

Presentation

Presentation

 

 

 

DVD

Camera control

Camera controlDocument camera

 

Settings

Settings

No presentation

 

D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012

37

www.cisco.com

All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.