12
Toshiba CTX 670 SMDI Integration Guide for CiscoUnity 4.0
OL-4404-07
Toshiba CTX 670 SMDI Integration Guide for CiscoUnity 4.0
Testing the Integration
Caution The phone system must forward calls to the Cisco Unity pilot number in no fewer than four
rings. Otherwise, the test may fail.
Step3 In the Cisco Unity Administrator, create a test subscriber to use for testing by doing the applicable
substeps below.
If your message store is Microsoft Exchange, do the following:
a. In the Cisco Unity Administrator, go to the Subscribers > Subscribers > Profile page.
b. Click the Add icon.
c. Select New Exchange Subscriber.
d. On the Add Subscriber page, enter the applicable information.
e. Click Add.
If your message store is IBM Lotus Domino, do the following:
a. In the Cisco Unity Administrator, go to the Subscribers > Subscribers > Profile page.
b. Click the Add icon.
c. Click Notes.
d. In the Address Book list, confirmthat the address book listed is the one that contains the user data
that you want to import.
If the address book that you want to use is not listed, go to the System > Configuration >
Subscriber Address Books page and add a different address book.
e. In the Find Domino Person By list, indicate whether to search by short name, first name, or last
name.
f. Enter the applicable short name or name. Youalso can enter * to display a list of all users, or enter
one or more characters followed by * to narrow your search.
g. Click Find.
h. On the list of matches, click the name of the user to import.
i. On the Add Subscriber page, enter the applicable information.
j. Click Add.
Step4 In the Extension field, enter the extension of Phone1.
Step5 In the Active Schedule field, clickAll Hours - All Days.
Step6 Click the Save icon.
Step7 In the navigation bar, clickCall Transfer to go to the Subscribers > Subscribers > Call Transfer page
for the test subscriber.
For more information on transfer settings, refer to the “Subscriber Template Call Transfer Settings”
section in the Cisco Unity Administrator Help.
Step8 UnderTransfer Incoming Calls, click Yes, Ring Subscriber’sExtension, and confirm that the extension
number is for Phone 1.
Step9 Under Transfer Type, clickRelease to Switch.
Step10 Click the Save icon.
Step11 In the navigation bar, clickMessages to go to the Subscribers > Subscribers > Messages page for the
test subscriber.