How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2
Step 9 Inform Cisco TAC that you are ready for the license key replacement.
Step 10 Perform full functionality testing.
Step 11 Return the old CPU card to manufacturing.
Installing the DVD-ROM Drive Software
Step 1 By using the null modem cable, connect the laptop to the COM1 service port on the front of the Cisco MeetingPlace 8112.
Step 2 Log in to the server as a technician through a telnet session or HyperTerminal.
Tip We recommend that you log your session.
Step 3 Insert the Update Diskette for M3
Step 4 To install the
Step 5 When the system reminds you to wait for the blinking light to stop, press Enter.
Step 6 After the light stops blinking, remove the diskette from the floppy disk drive.
The server is now upgraded to use the
Step 7 Insert the
Step 8 At the tech$ prompt, enter update.
Step 9 When prompted, choose 1 for CD and press Enter.
Step 10 When prompted to continue or abort, press Enter.
After the update is completed, a CD mounted OK message and more system options appear. Step 11 To perform the CD Test, choose 1 when you are asked to choose the desired set.
Step 12 When you are prompted to install the CD Test, enter y. Sample output from a CD test is shown in the “Installing the
Step 13 If the test passes, proceed to “Verifying the Cisco MeetingPlace Audio Server Release 5.2
or
If the test fails, contact Cisco TAC.
Installing the DVD-ROM Software Example
The following is sample output from a
server: tech$ update Update is from
1)CD
2)Diskette
3)Remote File
Cisco MeetingPlace Audio Server Release 5.2
| 13 |
| |
|
|
