How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2
Upgrading the Cisco MeetingPlace 8112 BIOS
Caution During this process, ensure that the power to the Cisco MeetingPlace 8112 is not turned off at any time.
To upgrade the Cisco MeetingPlace 8112 server BIOS, perform the following steps:
Step 1 Attach the monitor (LILLIPUT) to the Video port on the CPU card of the Cisco MeetingPlace 8112. Step 2 Attach the power cable to the monitor (LILLIPUT) and power source.
Step 3 Attach the keyboard to the Keyboard/Mouse port on the CPU card of the Cisco MeetingPlace 8112. Step 4 Turn on the monitor (LILLIPUT).
Step 5 Plug in the main power cable to the Cisco MeetingPlace 8112 and switch the server power to ON. Step 6 To get the log in prompt, press enter a couple of times; then, log in as a technician.
Step 7 At the tech$ prompt, enter restart disable.
The server will start to come up immediately, and you will see “Press F2 to Enter Set Up” on the bottom left side of the monitor (LILLIPUT).
Step 8 To enter setup mode, press F2.
The BIOS Setup Utility appears, as shown in Figure 8.
Figure 8 BIOS Setup Utility Main Screen
Cisco MeetingPlace Audio Server Release 5.2
| 9 |
| |
|
|
