How to Upgrade to the Cisco MeetingPlace Audio Server Release 5.2
Step 8 Remove the power cable from the top disk drive on the top left from back of server, as shown in Figure 4.
Note There are two cables connected: the pale yellow SCSI cable and the power cable. Do not remove the SCSI cable from the disk drive.
You may need to move other cables out of the way to see the connector. Make sure that the power cable is not tangled with other cables. The power cable will need to extend when you slide out with the tape drive.
Figure 4 Power Cable Connector on Top Disk Drive
Power Cable Connector
Step 9 At the front of the Cisco MeetingPlace 8112, remove the faceplate to the drive bay by loosening the four screws at the corners of the drive bay.
Note Do not turn the drive keys.
Cisco MeetingPlace Audio Server Release 5.2
6 |
| |
|
