Cisco Systems manual Setup MAC Address Clone, DynDNS..org, TZO..com, Linksys E2000

Linksys E2000

DynDNS..org

Setup > DDNS > DynDNS

Username  Enter the Username for your DDNS account.. Password  Enter the Password for your DDNS account..

Host Name  The DDNS URL assigned by the DDNS service is displayed..

System  Select the DynDNS service you use: Dynamic, Static, or Custom.. The default selection is Dynamic..

Mail Exchange (Optional)  Enter the address of your mail exchange server, so emails to your DynDNS address go to your mail server..

Backup MX  This option allows the Mail eXchange (MX) server to be a backup.. To disable this feature, keep the default, Disabled.. To enable the feature, select Enabled.. If you are not sure which setting to select, keep the default, Disabled..

Wildcard  This setting enables or disables wildcards for your host.. For example, if your DDNS address is myplace.dyndns.org and you enable wildcards, then x.myplace.dyndns.org will work as well (x is the wildcard).. To disable wildcards, keep the default, Disabled.. To enable wildcards, select Enabled.. If you are not sure which setting to select, keep the default, Disabled..

Internet IP Address  The Router’s Internet IP address is displayed here.. Because it is dynamic, it will change..

Status  The status of the DDNS service connection is displayed..

Update  To manually trigger an update, click Update..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Chapter 2: Advanced Configuration

TZO..com

Setup > DDNS > TZO

E-mail Address, TZO Key, and Domain Name  Enter the settings of the account you set up with TZO..

Internet IP Address  The Router’s Internet IP address is displayed here.. Because it is dynamic, it will change..

Status  The status of the DDNS service connection is displayed..

Update  To manually trigger an update, click Update..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Setup > MAC Address Clone

A Media Access Control (MAC) address is a 12-digit code assigned to a unique piece of hardware for identification.. Some ISPs require you to register a MAC address in order to access the Internet.. If you have your computer’s MAC address registered with your ISP and you do not wish to re-register the MAC address, then you may assign the registered MAC address to the Router with the MAC Address Clone feature..

Setup > MAC Address Clone

MAC Address Clone

Enabled/Disabled  To have the MAC Address cloned, select Enabled..

MAC Address  Enter the MAC Address registered with your ISP here..

Advanced Wireless-N Router 8