Linksys E2000
Wireless > Wireless MAC Filter
Wireless access can be filtered (restricted) by specifying the MAC addresses of the devices in your wireless network..
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled To filter wireless users by the MAC addresses of their computers or devices, select Enabled.. Otherwise, keep the default, Disabled..
Access Restriction
Prevent PCs listed below from accessing the wireless network When the Wireless MAC Filter is enabled and this option is selected, computers listed in the MAC Address filter list will be prevented from accessing the wireless network..
Permit PCs listed below to access the wireless network When the Wireless MAC Filter is enabled and this option is selected, only computers listed in the MAC Address filter list will be granted access to the wireless network..
MAC Address Filter List
Wireless Client List Click this option to open the Wireless Client List screen..
Chapter 2: Advanced Configuration
Wireless Client List
Wireless Client List
This screen shows computers and other devices on the wireless network.. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Status..
Select Save to MAC Address Filter List for any device you want to add to the MAC Address Filter List.. Then click Add..
To update the
MAC
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..
Wireless > Advanced Wireless Settings
The Advanced Wireless Settings screen is used to set up the Router’s advanced wireless functions.. These settings should only be adjusted by an advanced user because incorrect settings can reduce wireless performance.. In most cases, keep the default settings..
Wireless > Advanced Wireless Settings
Advanced | 15 |
