Linksys E2000 | Chapter 2: Advanced Configuration |
|
|
6.Decide which days and what times you want this policy to be enforced.. Select the individual days during which the policy will be in effect, or select Everyday.. Then enter a range of hours and minutes during which the policy will be in effect, or select 24 Hours..
7.You can block websites with specific URL addresses.. Enter each URL in a separate Website Blocking by URL Address field..
8.You can also block websites using specific keywords.. Enter each keyword in a separate Website Blocking by Keyword field..
9.You can filter access to various services accessed over the Internet, such as FTP or telnet.. (You can block up to three applications per policy..)
From the Applications list, select the application you want to block.. Then click the >> button to move it to the Blocked List.. To remove an application from the Blocked List, select it and click the << button..
10.If the application you want to block is not listed or you want to edit a service’s settings, enter the application’s name in the Application Name field.. Enter its range in the Port Range fields.. Select its protocol from the Protocol
To modify a service, select it from the Application list.. Change its Application Name, Port Range, and/or Protocol setting.. Then click Modify..
To delete a service, select it from the Application list.. Then click Delete..
11.Click Save Settings to save the policy’s settings.. To cancel the policy’s settings, click Cancel Changes..
Applications and Gaming > Single Port Forwarding
The Single Port Forwarding screen allows you to customize port services for various applications..
When users send these types of requests to your network via the Internet, the Router will forward those requests to the appropriate computers (also called servers).. Before using forwarding, you should assign static IP addresses to the designated computers (use the DHCP Reservation option on the Basic Setup screen; refer to “DHCP Reservation” on page 6)..
Applications and Gaming > Single Port Forwarding
Single Port Forwarding
Preset applications are available for the first five entries.. For each entry, complete the following:
Application Name Select the appropriate application..
To IP Address Enter the IP address of the computer that should receive the requests.. If you assigned a static IP address to the computer, then you can look up its static IP address; refer to “DHCP Reservation” on page 6..
Enabled Select Enabled to enable port forwarding..
You can customize entries for additional applications.. For each entry, complete the following:
Application Name Enter the name you wish to give the application.. Each name can be up to 12 characters..
External Port Enter the external port number used by the computer or Internet application.. Check with the Internet application documentation for more information..
Internal Port Enter the internal port number used by the computer or Internet application.. Check with the Internet application documentation for more information..
Protocol Select the protocol(s) used for this application, TCP (Transmission Control Protocol), UDP (User Datagram Protocol), or Both..
To IP Address Enter the IP address of the computer that should receive the requests.. If you assigned a static IP address to the computer, then you can look up its static IP address; refer to “DHCP Reservation” on page 6..
Enabled Select Enabled to enable port forwarding..
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..
Advanced | 19 |
