Linksys E2000
WEP
WEP is a basic encryption method that is not as secure as WPA..
NOTE: If you select WEP as your Security Mode, each device in your wireless network MUST use WEP and the same encryption and passphrase..
Wireless Security > WEP
Encryption Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).. The default is 40/64 bits (10 hex digits)..
Passphrase Enter a Passphrase to automatically generate WEP keys.. Then click Generate..
Key 1 If you did not enter a Passphrase, enter the WEP key manually..
RADIUS
This option features WEP used in coordination with a RADIUS server.. (This should only be used when a RADIUS server is connected to the Router..)
NOTE: If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared secret key..
Wireless Security > RADIUS
Advanced
Chapter 2: Advanced Configuration
RADIUS Server Enter the IP address of the RADIUS server..
RADIUS Port Enter the port number of the RADIUS server.. The default value is 1812..
Shared Secret Enter the key shared between the Router and the server..
Encryption Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).. The default is 40/64 bits (10 hex digits)..
Passphrase Enter a Passphrase to automatically generate WEP keys.. Then click Generate..
Key 2 If you did not enter a Passphrase, enter the WEP key manually..
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..
Disabled
If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet.. You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security..
NOTE: When wireless security is disabled, anyone can access your wireless network at any time..
Disabled
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..
14