Linksys E2000
this will defeat the purpose of allocating the available bandwidth.. If you want to select below normal bandwidth, select Low.. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority..
Enabled/Disabled To use the QoS policies you set, select Enabled.. Otherwise, keep the default, Disabled..
Upstream Bandwidth This option sets the maximum outgoing bandwidth that applications can use.. To allow the Router to set the maximum, keep the default, Auto.. To specify the maximum, select Manual.. Then enter the appropriate value and select Kbps or Mbps..
Category
You can define the Internet access priority level for as many categories as you want.. The Summary section will display all of the priority selections that you enter.. Select from the following categories:
••Applications Allows you to assign a priority level for a
••Online Games Allows you to assign a priority level for a
••MAC Address This option lets you prioritize network traffic based on the device that is accessing the network.. For example, if you want your gaming console to have higher priority accessing the Internet than your computer, you can assign their priority levels using their respective MAC addresses..
••Voice Device Voice devices require a higher priority level.. You can assign a higher priority level to voice devices using their respective MAC addresses..
Summary
This lists the QoS entries you have created for your applications and devices.. Refer to “Summary” on page 23 for more information..
Applications
Applications Select the appropriate application.. If you select Add a New Application, follow the instructions in the Add a New Application section..
Priority Select the appropriate priority: High, Medium (Recommend), Normal, or Low..
Click Add to save your changes.. Your new entry will appear in the Summary list..
Chapter 2: Advanced Configuration
Add a New Application
QoS > Add a New Application
Enter a Name Enter a name for this application..
Port Range Enter the port range that the application will be using.. For example, if you want to allocate bandwidth for FTP, you can enter
Select the protocol TCP or UDP, or select Both..
Priority Select the appropriate priority: High, Medium (Recommend), Normal, or Low..
Click Add to save your changes.. Your new entry will appear in the Summary list..
Online Games
QoS > Online Games
Game Select the appropriate game.. If you select Add a New Game, follow the instructions in the Add a New Game section..
Priority Select the appropriate priority: High, Medium (Recommend), Normal, or Low..
Click Add to save your changes.. Your new entry will appear in the Summary list..
Add a New Game
QoS > Add a New Game
Enter a Name Enter any name to indicate the name of the entry..
Advanced | 22 |