Linksys E4200
b. Connect the power adapter to an electrical outlet..
1 
2 
3 
4
USB
Reset | 12VDC |
| |
| Power |
Connect to Electrical Outlet
c.Connect one end of an Ethernet cable to the yellow port labeled Internet on the back of the router.. Connect the other end of the Ethernet cable to your broadband modem or existing router/gateway.. Click Next..
1 | 2 Ethernet 3 | 4 | USB | Reset | 12VDC |
Power |
Connect Ethernet Cable
NOTE: To view detailed connection steps, click 
in the setup software..
5.Please wait while the setup software is setting up the router..
Setting Up the Router
Chapter 1: Installation
6.The router name and password are displayed.. (The router name is the name of your wireless network, which is also known as an SSID, Service Set IDentifier..) You can change them later in Cisco Connect..
Click Next..
Linksys Router Settings
7.Please wait while the setup software is finishing the setup..
Finishing the Setup
8. The installation is complete.. Click OK..
Installation is Complete
After installation, Cisco Connect starts automatically.. For information on using Cisco Connect to manage the router and your network, go to “How to Use Cisco Connect” on page 3..
Maximum Performance | 2 |
