Cisco Systems Gateway 10 quick start Cabling the Cisco RFGW-10 UEQAM, Management Port

Step 1 Connect one end of the RJ-45 crossover cable to the RJ-45 port (labeled CONSOLE) on the supervisor.

Step 2 Connect the other end of the cable to the appropriate port on the PC or terminal to complete the console port cable connection.

Management Port

The management port provides an Ethernet port to a LAN for a 10BASE-T and 100BASE-T connection for network management.

Step 1 Connect one end of the RJ-45 Ethernet cable to the RJ-45 port (labelled Management on the supervisor card).

Step 2 Connect the other end of the cable to the appropriate port on the PC or console to complete the management port cable connection.

Cabling the Cisco RFGW-10 UEQAM

The following tools are required for the Cisco RFGW-10 coaxial termination:

•12 universal cable holders UCH2 (supplied in the accessory kit)

•T-10 TORX driver tool

•¼” flat head screwdriver

•MCX terminated cable bundle (optional)

Figure 14 Universal Cable Holder UCH2

TORX screw

Lock bar

Lead

screw

TORX screw

Red line

Small pin

Cutout

Screws into faceplate

Cutout

Large pin

Shroud 155821

20