Recommended Tools and Supplies
Table 2 lists the recommended tools and supplies.
Table 2 | Recommended Tools and Supplies |
| |
|
|
|
|
Quantity |
| Description | Comments |
|
|
|
|
1 |
| Number 2 Phillips screwdriver | — |
|
|
|
|
1 |
| — | |
|
|
|
|
1 |
| Crimping tool | This tool must be large enough to accommodate the girth of the |
|
|
| grounding lug when you crimp the grounding cable into the lug. |
|
|
|
|
1 |
| Included in the accessory kit. | |
|
|
| The 90 degree grounding lug has two M5 holes spaced 0.63 in |
|
|
| center to center. If the lug from the accessory kit is misplaced, use |
|
|
| an alternate lug (for example, Panduit |
|
|
| EL1048). |
|
|
|
|
1 |
| Grounding wire | 6 AWG (16 mm2) |
|
|
| The length of the grounding wires depends on the location of your |
|
|
| chassis within the site and its proximity to proper grounding |
|
|
| facilities. |
|
|
|
|
2 |
| Two M5 (metric) phillips head screws | Included in the accessory kit for use to attach the chassis ground |
|
|
| to the chassis. |
|
|
|
|
1 |
| Antistatic mat and | — |
|
|
|
|
10 |
| Included in the accessory kit. Lugs are for power and ground to the | |
|
|
| DC PEM. |
|
|
| Panduit |
|
|
| spacing. |
|
|
|
|
5 |
| Power supply wire | 4 AWG (25 mm2) |
|
|
|
|
1 |
| 10 mm socket wrench | This is used for securing the M6 nuts on the PS DC inputs and |
|
|
| ground terminals. |
|
|
| |
The unit “mm” | stands for milli meter. |
| |
|
|
|
|
18