Configuring LAN Interfaces

Configuring a Token Ring Interface

Configuring a Token Ring Interface

Cisco supports various Token Ring interfaces. Refer to the Cisco Product Catalog for information about platform and hardware compatibility.

The Token Ring interface supports both routing (Layer 3 switching) and source-route bridging (Layer 2 switching) on a per-protocol basis. For example, IP traffic could be routed while SNA traffic is bridged. Routing features enhance source-route bridges.

The Token Ring MIB variables support the specification in RFC 1231, “IEEE 802.5 Token Ring MIB.” The mandatory Interface Table and Statistics Table are implemented, but the optional Timer Table of the Token Ring MIB is not. The Token Ring MIB has been implemented for the Token Ring Interface Processor (TRIP).

Use the show interfaces, show controllers token, and show controllers cbus EXEC commands to display the Token Ring numbers. These commands provide a report for each ring that Cisco IOS software supports.

Note If the system receives an indication of a cabling problem from a Token Ring interface, it puts that interface into a reset state and does not attempt to restart it. It functions this way because periodic attempts to restart the Token Ring interface drastically affect the stability of routing tables. Once you have again plugged the cable into the MAU, restart the interface by using the clear interface tokenring command, where the number argument is the interface number.

By default, the Token Ring interface uses the SNAP encapsulation format defined in RFC 1042. It is not necessary to define an encapsulation method for this interface.

Particle-Based Switching of Source-Route Bridge Packets on Cisco 7200 Series Routers

Particle-based switching is supported for SRB packets (over FDDI and Token Ring) by default.

Particle-based switching adds scatter-gather capability to SRB to improve performance. Particles represent a communications data packet as a collection of noncontiguous buffers. The traditional Cisco IOS packet has a packet type control structure and a single contiguous data buffer. A particle packet has the same packet type control structure, but it also maintains a queue of particle type structures, each of which manages its own block.

The scatter-gather architecture used by particle-based switching provides the following advantages:

•Allows drivers to use memory more efficiently (especially when using media that has a large maximum transmission unit [MTU]). For example, Token Ring buffers could be 512 bytes rather than 16 KB.

•Allows concurrent use of the same region of memory. For example, on IP multicast a single packet is received and sent out on multiple interfaces simultaneously.

•Allows insertion or deletion of memory at any location in a packet (not just at the beginning or end).

For information about configuring SRB over FDDI, refer to the “Configuring Source-Route Bridging” chapter of the Cisco IOS Bridging and IBM Networking Configuration Guide.

Cisco IOS Interface Configuration Guide

IC-58

Page 35 Page 37
Page 36
Image 36
Cisco Systems IC-23 manual Configuring a Token Ring Interface, IC-58
Page 35 Page 37

IC-23 specifications

Cisco Systems IC-23 is a robust networking device designed to address the ever-evolving demands of modern enterprises. As part of Cisco's extensive portfolio, the IC-23 serves as an ideal solution for organizations seeking to enhance their network performance, reliability, and scalability.

One of the standout features of the Cisco IC-23 is its high-speed connectivity options. With support for both wired and wireless communications, this device can seamlessly integrate into a wide range of network architectures. It offers multiple Gigabit Ethernet ports, enabling rapid data transfer and facilitating the connection of numerous devices without compromising performance.

Another key characteristic of the IC-23 is its advanced security protocols. Data breaches and cyber threats are persistent concerns in today's digital landscape, and Cisco addresses these challenges head-on with robust security measures. The IC-23 incorporates features such as firewall capabilities, intrusion detection systems, and secure VPN support, ensuring that sensitive information remains protected while traversing the network.

The IC-23 also leverages Cisco's renowned software-defined networking (SDN) capabilities. This technology allows businesses to manage their network resources dynamically, ensuring optimal performance based on real-time demands. As a result, organizations can easily adjust their network configurations to meet fluctuating workloads, enhancing both efficiency and cost-effectiveness.

Scalability is another critical feature of the IC-23, making it an excellent choice for growing companies. Cisco has designed this device to accommodate increasing data traffic without necessitating a complete overhaul of existing infrastructure. This adaptability ensures that organizations can expand their networks smoothly as their operations evolve.

Moreover, the IC-23 supports a variety of network management tools, providing IT teams with the insights needed to monitor performance and troubleshoot issues proactively. Cisco's user-friendly interface simplifies the process of network management, allowing administrators to optimize resources and maintain continuous uptime.

In conclusion, Cisco Systems IC-23 stands out as a highly capable networking solution tailored for modern enterprises. With its high-speed connectivity, comprehensive security features, SDN capabilities, scalability, and intuitive management tools, the IC-23 is well-equipped to meet the demands of today’s digital environments. As organizations continue to navigate the complexities of the digital age, the IC-23 prepares them to thrive in an increasingly interconnected world.
Top Page Image Contents