Cisco Systems ME3600X24FSM, ME 3600X 24CX manual About this Guide, Box Contents

About this Guide

About this Guide

This guide provides instructions on how to install and configure your Cisco Metro Ethernet (ME) 3800X and ME 3600X switch. Also covered are switch management options, basic rack-mounting procedures, port and module connections, and troubleshooting help.

For more installation and configuration information, see the Cisco ME 3800X and ME 3600X switch documentation on Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and last-minute documentation updates, see the release notes, also on Cisco.com.

When you use the online publications, refer to the documents that match the Cisco IOS software version that is running on the switch. Look on the switch rear panel to locate the software version or enter the show version command from the CLI.

For translations of safety warnings that appear in this publication, review the warnings in the Regulatory Compliance and Safety Information for the Cisco ME 3600X-24CX Switch on Cisco.com.

Box Contents

Documentation
and	Product
	Compliance

1 2

3 4 5 6

7 8 9 10

333304

1	Cisco ME 3600X-2CX switch	6	Two 19-inch mounting brackets
2	Product documentation and compliance document	7	Cable guide and screw
3	AC power cord	8	Four number-12 pan head screws
4	Power cord bail and bushing	9	Four number-8 Phillips truss-head screws
5	Ground lug	10	Eight number-8 Phillips flat-head screws

Note Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.

Cisco ME 3600X-24CX Switch Getting Started Guide

2 OL-27508-01