Cisco Systems MWR-1900-27 Operating Conditions for Canada

CISPR 22 Class A Warning

78-13978-03

Operating Conditions for Canada

the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.”

[cfr reference 15.105]

For CISPR22 Class A, the following warning is provided:

Warning

This is a class A product. In a domestic environment, this product may cause radio interference,

in which case the user may be required to take adequate remedial measures.

The Cisco MWR 1900 router VWIC-2MFT-T1-DIR Voice/WAN interface card meets the Japanese

Approvals Institute for Telecommunication Equipment (JATE) approval:

Table4 JATE Approval for Cisco MWR 1900 VWIC-2MFT-T1-DIR WAN Interface Card

Operating Conditions for Canada

In addition to the warnings and safety guidelines listed in the section “Translated Safety Warnings,” the

following warnings apply to models used in Canada:

•The Canadian Department of Communications label identifies certified equipment. This

certification means that the equipment meets certain telecommunications network protective

operational and safety requirements. The Department does not guarantee the equipment will operate

to the user’s satisfaction.

•Before installing the equipment, users should ensure that it is permissible to be connected to the

facilities of the local telecommunications company. The equipment must also be installed using an

acceptable method of connection. In some cases, the company’s inside wiring associated with a

single line individual service may be extended by means of a certified connector assembly

(telephone extension cord). The customer should be aware that compliance with the preceding

conditions may not prevent degradation of service in some situations.

Model Number Approval Number

VWIC-2MFT-T1-DIR D02-0552JP