Cisco Systems N3KC3048TP1GE, N3KC3064TFAL3 manual Configuring IGMP Snooping Parameters, Description

Models: N3KC3064TFAL3 N3KC3048TP1GE

1 164
Download 164 pages 5.98 Kb
Page 152
Image 152
Configuring IGMP Snooping Parameters

Configuring IGMP Snooping

Configuring IGMP Snooping Parameters

Configuring IGMP Snooping Parameters

To manage the operation of the IGMP snooping process, you can configure the optional IGMP snooping parameters described in the following table.

Table 11: IGMP Snooping Parameters

 

 

Parameter

Description

IGMP snooping

Enables IGMP snooping on a per-VLAN basis. The

 

default is enabled.

 

Note

If the global setting is disabled, then all

 

 

VLANs are treated as disabled, whether they

 

 

are enabled or not.

Explicit tracking

Tracks IGMPv3 membership reports from individual

 

hosts for each port on a per-VLAN basis. The default

 

is enabled.

Fast leave

Enables the software to remove the group state when

 

it receives an IGMP Leave report without sending an

 

IGMP query message. This parameter is used for

 

IGMPv2 hosts when no more than one host is present

 

on each VLAN port. The default is disabled.

Last member query interval

Sets the interval that the software waits after sending

 

an IGMP query to verify that no hosts that want to

 

receive a particular multicast group remain on a

 

network segment. If no hosts respond before the last

 

member query interval expires, the software removes

 

the group from the associated VLAN port. Values

 

range from 1 to 25 seconds. The default is 1 second.

Snooping querier

Configures a snooping querier on an interface when

 

there is no multicast router in the VLAN to generate

 

queries. The default is disabled.

Report suppression

Limits the membership report traffic sent to

 

multicast-capable routers. When you disable report

 

suppression, all IGMP reports are sent as is to

 

multicast-capable routers. The default is enabled.

Multicast router

Configures a static connection to a multicast router.

 

The interface to the router must be in the selected

 

VLAN.

 

Configures a static connection to a virtual port channel (vPC) peer-link

 

Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)

138

OL-26590-01

Page 152
Image 152
Cisco Systems N3KC3048TP1GE, N3KC3064TFAL3 manual Configuring IGMP Snooping Parameters, Description