Cisco Systems N3KC3048TP1GE Configuring the Debounce Timer, Configuring the Description Parameter

Configuring Ethernet Interfaces

Configuring the Debounce Timer

Procedure

	Command or Action
Step 1	config t
	Example:
	switch#config t
	switch(config)#
Step 2	errdisable recovery interval interval

Example:

switch(config)#errdisable recovery interval 32

switch(config-if)#

Step 3 show interface status err-disabled

Example:

switch(config)#show interface status err-disabled

Purpose

Enters configuration mode.

Specifies the interval for the interface to recover from the err-disabled state. The range is from 30 to 65535 seconds. The default is 300 seconds.

Displays information about err-disabled interfaces.

Step 4	copy running-config startup-config	(Optional) Copies the running configuration
		to the startup configuration.
	Example:
	switch(config)#copy running-config
	startup-config

This example shows how to enable err-disabled recovery under all conditions:

switch(config)#errdisable recovery cause all switch(config)#

Configuring the Debounce Timer

This feature is not supported on the Nexus 3000 product.

Configuring the Description Parameter

To provide textual interface descriptions for the Ethernet ports, perform this task:

Procedure

	Command or Action	Purpose
Step 1	switch# configure terminal	Enters configuration mode.
Step 2	switch(config)# interface type slot/port	Enters interface configuration mode for the
		specified interface.

	Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)
20	OL-26590-01