Cisco Systems N3KC3064TFAL3 manual Verifying the Private VLAN Configuration, switch# show feature

Configuring Private VLANs

Configuring Native 802.1Q VLANs on Private VLANs

Configuring Native 802.1Q VLANs on Private VLANs

You cannot perform this task because the Cisco Nexus 3000 Series device does not support Private VLAN trunk ports.

Verifying the Private VLAN Configuration

To display PVLAN configuration information, use the following commands:

Command	Purpose
switch# show feature	Displays the features enabled on the switch.
switch# show interface switchport	Displays information on all interfaces configured as
	switch ports.
switch# show vlan private-vlan [type]	Displays the status of the PVLAN.

This example shows how to display the PVLAN configuration:

switch# show vlan private-vlan			Ports
Primary	Secondary	Type
-------	---------	---------------	-------------------------------------------
5	100	community	Eth1/12, Eth100/1/1
5	101	community
5	102	community
5	110	community	Eth1/2
5	200	isolated

switch# show vlan private-vlan type Vlan Type

---------------------

5 primary

100 community

101 community

102 community

110 community

200 isolated

The following example shows how to display enabled features (some of the output has been removed for brevity):

switch# show feature	Instance	State
Feature Name
--------------------	--------	--------
fcsp	1	enabled
...	1	enabled
interface-vlan
private-vlan	1	enabled
udld	1	disabled
...

Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)

OL-26590-01 47