![](/images/new-backgrounds/1174498/17449819x1.webp)
1w1d: ILMI(ATM2/0/0):Updating ES Database with 7.0091.8100.0000.0060.3e5a.4501.0060.3e5a.4502.00
1w1d: Reg Status :− Delete in progress − False, Add in progress − True
1w1d: ILMI(ATM2/0/0):Response received for request 930
1w1d: ILMI(ATM2/0/0): Errored response <General Error> Function Type = ilmiReqOther
1w1d: ILMI(ATM2/0/0): Errored or no response received
1w1d: ILMI(ATM2/0/0): ES database update not done
1w1d: ILMI(ATM2/0/0):Updating ES Database with 47.0091.8100.0000.0060.3e5a.4501.0000.0000.0001.01
1w1d: Reg Status :− Delete in progress − False, Add in progress − True
1w1d: %LANE−3−NOREGILMI: ATM2/0/0.1 LEC cannot register 47.00918100000000603E5A4501.000000000001.01 with ILMI
!−−− Output suppressed.
Casimir:
!−−− Output suppressed.
Apr 2 13:10:06.800: ILMI: Validating address 47.0091.8100.0000.0060.3e5a.4501.0000.0000.00
Apr 2 13:10:06.800: ILMI: Address rejected by Client identified as pnni(ATM0/0/0)
!−−− Output suppressed.
Note: The situation described in this section can often be encountered in the following scenario. If LECS services are configured on Cisco devices and other vendor devices at the same time and all these LECS are listening to the well−known address and advertising it, this message can be displayed:
1w2d: %LANE−3−NOREGILMI: ATM2/0/0 LECS cannot register 47.007900000000000000000000.00A03E000001.00 with ILMI
As LECS are configured on non−Cisco devices as well as Cisco devices, you cannot use SSRP of Fast−SSRP. The purpose of these redundancy protocols is that one LECS is elected as Master LECS (the others being backup LECS). The master LECS is the only one allowed to advertise the well−known address if it is being used. In this case, since you cannot configure a redundancy protocol, there is no Master LECS election. Hence, all the LECS try to advertise the well−known address, but only one succeeds.
To illustrate this, the configurations have been modified as shown:
Bernard
lane database test
name ilmi−test server−atm−address 47.00918100000000603E5A4501.00603E5A4503.01
!
interface ATM2/0/0 no ip address
no ip route−cache distributed no atm ilmi−keepalive
pvc 0/16 ilmi
!
pvc 0/5 qsaal
!
lane config fixed−config−atm−address
Cisco − ILMI Address Registration Problems: %LANE−3−NOREGILMI