The router does not receive its prefix and hence no address−registration can occur.
When enabling debug atm ilmi atm 0/0/0 on the LightStream 1010, this can be seen when the atm 0/0/0 interface is brought up:
!−−− Output suppressed.
Apr 2 12:42:11.792: ILMI: My Device type is set to Node (ATM0/0/0)
Apr 2 12:42:11.792: ILMI(ATM0/0/0): From NodeConfigComplete To UpAndNormal <ilmi_proce
Apr 2 12:42:11.792: ILMI(ATM0/0/0): Keep Alive enabled
Apr 2 12:42:11.792: ILMI(ATM0/0/0) Address Registration disabled. Prefix not sent
!−−− Output suppressed.
The solution is to re−enable atm address−registration and do a shut/no shut on the atm interface to restart ILMI.
Related Information
∙LANE Design Recommendations
∙SSRP Sample Configuration
∙FSSRP Sample Configuration
∙Configuring LANE
∙Troubleshooting ATM LAN Emulation Networks
∙LANE Technology Support
∙Technical Support − Cisco Systems
All contents are Copyright © 1992−2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Updated: May 11, 2005 | Document ID: 10450 |
|
|
Cisco − ILMI Address Registration Problems: %LANE−3−NOREGILMI
