CiscoIOS Software Configuration for th e 1-Port Chann elized OC-12/STM-4 (DS3) Line Card
How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card
9
Cisco IOS Release 12.0(8)S
Last clearing of "show interface" counters 1d16h
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
18617 packets input, 1537679 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
16834 packets output, 2198122 bytes, 0 underruns
0 output errors, 0 applique, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
Router#
•The following commands are line card specific and are executed from the line card only. To log on
to the line card and execute the following commands, use the attach [slot number] EXEC command,
as shown in the following example:
Router# attach 1
slot1# enable
slot1#
•To display controller information about an instance of an OC-12 controller, an instance of a DS3
channel controller, or both, as viewed from the line card, use the following versions of the
show controllers oc12 EXEC command:
–
show controllers oc12 slot/port
Display information about an OC-12 controller by entering the show controllers oc12 slot/port
command for a 1-port channelized OC-12/STM-4 (DS3) line card:
Router# show controllers oc12 1/0
OC12_CH_DS31/0
The current state of the controller is up
Current configurable parameter settings:
Clock source is INTERNAL, Loopback is NONE
SECTION
LOF = 0 LOS = 0 RDOOL = 0 BIP(B1) = 0
Active Alarms: None
LINE
AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0
Active Alarms: None
PATH 1
AIS = 0 RDI = 0 FEBE = 0 BIP(B3) = 0
LOP = 0 NEWPTR = 0 PSE = 0 NSE = 0
Active Alarms: None
S1S0 = 02, C2 = 04
PATH TRACE BUFFER : STABLE
PATH 2
AIS = 0 RDI = 0 FEBE = 0 BIP(B3) = 0
LOP = 0 NEWPTR = 0 PSE = 0 NSE = 0
Active Alarms: None
S1S0 = 03, C2 = FF
PATH TRACE BUFFER : STABLE
(Remainder of displayed text omitted from example.)