Cisco Systems OL-11390-01 f “ arguments”, host1,host2, Connect to DFM, page, UDPreservedport

Chapter 11 Administering DFM (Advanced)

System Administration

Table 11-4	Options to pdcmd (continued)
Option		Description and Arguments
-rprocess		(continued from previous page)
-f “ arguments”		DFM-specific arguments, enclosed in one set of quotes. arguments can be the
		following:
		--accept	(Optional.) Comma-separated list of hostnames or IP
		host1,host2...	addresses specifying clients which can connect to the
			server. (The DFM server does not use reverse lookups
			to determine names of connecting hosts. If you specify
			a client as hostname, be sure the hostname is in DNS,
			especially if you are using DHCP. If you want to specify
			localhost, use the hostname or IP address, not localhost;
			refer to Example 1: Specifying Clients that Can
			Connect to DFM, page 11-18.)
		--privopen=open-list(Optional.) Specify the privileged ports and protocol
			which DfmBroker or DfmServer may open (see
			Working with Firewalls, page 11-2, for an example).
			open-listcan be a comma-separated list of the following
			(IP:protocol is always required):
			TCP:port, UDP:port, IP:protocol
			The defaults for open-listdepend on whether DFM is
			using a reserved port:
			--privopen=IP:1	Default if reserved port is not
				being used.
			--privopen=IP:1,	Default if reserved port is
			UDP:reserved_port	being used (normally 162).
		--ouptut=file	(Required.) Name of process output file. For
			DfmServer, file should be DFM.
		--port=port	(DfmBroker only.) DFM broker port. port should
			always be 9002.
		--restore=file	(DfmBroker only.) Restore broker state from backup
			file. file should always be:
			--restore=NMSROOT/objects/smarts/conf/broker.rps
-n		Do not restart process when DfmServer is stopped and restarted.

	User Guide for Device Fault Manager
OL-11390-01		11-17