Cisco Systems OL-11390-01 manual Starting and Stopping DFM Processes, Name, Dependency, 11-13

Chapter 11 Administering DFM (Advanced)

System Administration

Starting and Stopping DFM Processes

Note You cannot stop or unregister a process if any process that depends on it is running. You must first stop or unregister all dependent processes, and then stop or unregister the process.

Step 1 Log in to DFM as a system administrator.

Step 2 Select Server Configuration > Adm > Processes. The Processes page appears.

Note If a process is not listed, it has not yet been started.

Step 3 On the Processes page, select the process you want to stop in the Process list.

Step 4 To stop the process, click Stop.

Step 5 To restart the process, select Server Configuration > Admin > Processes. The Processes page appears.

Step 6 On the Processes page, select the process you want to start in the Process list.

Step 7 To start the process, click Start.

Table 11-3provides a complete list of DFM-related CiscoWorks processes. Logs for most of these processes are provided in Table 11-2 on page 11-11.

Table 11-3	DFM-Related CiscoWorks Processes
Name		Description	Dependency
AdapterServer		Event adapter takes events from backend servers.	None
DataPurge		Data Purge—Starts as scheduled in the GUI and	jrm
		purges the Fault History database.

	User Guide for Device Fault Manager
OL-11390-01		11-13