Chapter 7 High Latency and Low Bandwidth Interconnection
Performance Guidelines
•For high latency, low bandwidth deployments, allow 1.5 minutes for every three channel/VTG activations.
•If five dispatchers submit commands, or if the same dispatcher submits several commands, a wait time of 1.5 minutes should be allotted before resubmitting new command requests.
•For constant load conditions, a frequency of about 18 seconds per simple VTG command should be allotted on 2811 routers (RMS components), on average. Additional RMS components must be installed to support above average load conditions.
SRND for Cisco IPICS Release 2.0(1)
|
|
| |
|
|
