Installing PVDM2 Modules

Connecting Cisco Voice Network Modules to the Network

IP Communications High-Density Digital Voice or Fax Network Module

Figure 16 NM-HDV2-2T1/E1 Jumpers Configured for Normal Mode

135658

Pin 3 Pin 2

Pin 1

The NM-HDV2 network modules contain four 80-pin SIMM sockets for PVDM2 modules, numbered 0 through 3. (See Figure 17.) Each socket can be filled with a single 80-pin PVDM2 module.

Connecting Cisco Voice Network Modules to the Network

Page 12

Image 12

Cisco Systems OL-12812-01 manual Installing PVDM2 Modules, NM-HDV2-2T1/E1 Jumpers Configured for Normal Mode

Contents

Connecting Cisco Voice Network Modules to the Network Voice Network Modules 4-Channel Voice Network Modules 48-Channel High-Density Voice Network Modules Channel High-Density Voice Network Module Packet Voice DSP Modules Pvdm Orientation Pvdm Orientation Installing PVDMs Removing PVDMs Voice Network Module LEDs View from front of board HDV Network Module LEDs Voice Network Module LED Packet Fax or Voice DSP Modules NM-HDV2 VIC-2DID Configuring E1 Ports for Normal or Wetting Current Mode Installing PVDM2 Modules NM-HDV2-2T1/E1 Jumpers Configured for Normal Mode PVDM2 Module Orientation PVDM2 Module Slot Locations Installing PVDM2 Modules Removing PVDM2 Modules Installing PVDM2 Modules NM-HDV2 Network Module LEDs Related Documents NM-HDV2 Network Module LEDs Connecting Cisco Voice Network Modules to the Network