Chapter 42 Configuring PFC QoS

PFC QoS Configuration Guidelines and Restrictions

General Guidelines

The match ip precedence and match ip dscp commands filter only IPv4 traffic.

In Release 12.2(18)SXE and later releases, the match precedence and match dscp commands filter IPv4 and IPv6 traffic.

In Release 12.2(18)SXE and later releases, the set ip dscp and set ip precedence commands are saved in the configuration file as set dscp and set precedence commands.

In Release 12.2(18)SXE and later releases, PFC QoS supports the set dscp and set precedence policy map class commands for IPv4 and IPv6 traffic.

The flowmask requirements of QoS, NetFlow, and NetFlow data export (NDE) might conflict, especially if you configure microflow policing.

With egress ACL support for remarked DSCP and VACL capture both configured on an interface, VACL capture might capture two copies of each packet, and the second copy might be corrupt.

You cannot configure egress ACL support for remarked DSCP on tunnel interfaces.

Egress ACL support for remarked DSCP supports IP unicast traffic.

Egress ACL support for remarked DSCP is not relevant to multicast traffic. PFC QoS applies ingress QoS changes to multicast traffic before applying egress QoS.

NetFlow and NetFlow data export (NDE) do not support interfaces where egress ACL support for remarked DSCP is configured.

When egress ACL support for remarked DSCP is configured on any interface, you must configure an interface-specific flowmask to enable NetFlow and NDE support on interfaces where egress ACL support for remarked DSCP is not configured. Enter either the mls flow ip interface-destination-sourceor the mls flow ip interface-fullglobal configuration mode command.

Interface counters are not accurate on interfaces where egress ACL support for remarked DSCP is configured.

You cannot apply microflow policing to IPv6 multicast traffic.

You cannot apply microflow policing to traffic that has been permitted by egress ACL support for remarked DSCP.

Traffic that has been permitted by egress ACL support for remarked DSCP cannot be tagged as MPLS traffic. (The traffic can be tagged as MPLS traffic on another network device.)

When you apply both ingress policing and egress policing to the same traffic, both the input policy and the output policy must either mark down traffic or drop traffic. PFC QoS does not support ingress markdown with egress drop or ingress drop with egress markdown. (CSCea23571)

If traffic is both aggregate and microflow policed, then the aggregate and microflow policers must both be in the same policy-map class and each must use the same conform-actionand exceed-actionkeyword option: drop, set-dscp-transmit, set-prec-transmit, or transmit.

You cannot configure PFC QoS features on tunnel interfaces.

PFC QoS does not rewrite the payload ToS byte in tunnel traffic.

PFC QoS filters only by ACLs, dscp values, or IP precedence values.

 

Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX

42-50

OL-4266-08

Page 50
Image 50
Cisco Systems OL-4266-08 manual General Guidelines, 42-50

OL-4266-08 specifications

Cisco Systems OL-4266-08 is a robust and versatile certification that focuses on the essentials of implementing and troubleshooting Cisco collaborations solutions. As enterprises increasingly rely on unified communications, having professionals who are knowledgeable in the latest Cisco technologies becomes a necessity. This certification is part of the Cisco Certified Network Associate (CCNA) program, which serves as a foundational stepping stone for individuals aspiring to build a career in networking and collaboration technologies.

One of the main features of OL-4266-08 is its emphasis on collaboration foundations, which includes an understanding of voice, video, messaging, and conferencing technologies. Professionals who obtain this certification demonstrate proficiency in deploying, configuring, and troubleshooting Cisco collaboration solutions like Cisco Unified Communications Manager and Cisco Webex. This knowledge is critical as businesses seek to enhance communication and productivity through integrated systems.

Technologically, OL-4266-08 covers a wide array of essential concepts, including IP telephony, voicemail, and collaborative tools. Candidates learn about the architecture of unified collaboration systems, involving integration with routing and switching networks. Additionally, it delves into security protocols to ensure secure transmissions of voice and video data, thereby protecting sensitive corporate communication.

In terms of characteristics, OL-4266-08 is designed to be both comprehensive and practical. The certification emphasizes hands-on experience, which is essential for understanding real-world applications of Cisco technologies. The coursework provides extensive exposure to simulations and labs that mimic actual network environments. This hands-on approach enables candidates to troubleshoot issues effectively using Cisco's troubleshooting tools and methodologies.

Moreover, the certification aligns with industry standards, ensuring that individuals gain relevant and in-demand skills. Given the evolving landscape of network technologies, OL-4266-08 prepares individuals for future growth and specialization in various areas, including cloud collaboration and Internet of Things (IoT) communications.

In conclusion, Cisco Systems OL-4266-08 equips networking professionals with the necessary skills to implement and support Cisco collaboration solutions. The focus on hands-on experience, along with in-depth coverage of technology and security protocols, makes it a valuable certification in the fast-paced world of network communications. With the rise of remote work and digital collaboration, this certification is pivotal for anyone looking to enhance their career in networking and technology.