Manuals / Cisco Systems / Computer Equipment / Network Router

Cisco Systems OL-4266-08 manual Mapping Dscp Values to Standard Receive-Queue Thresholds, 42-100

Models: OL-4266-08

1 124

Download 124 pages 34.88 Kb

Page 100

Chapter 42 Configuring PFC QoS

Configuring PFC QoS

Router(config)# interface gigabitethernet 6/1

Router(config-if)# mls qos trust dscp

Router(config-if)# end

Router#

This example shows how to verify the configuration:

Router# show queueing interface gigabitethernet 6/1 include Trust state

Trust state: trust DSCP

Mapping DSCP Values to Standard Receive-Queue Thresholds

To map DSCP values to the standard receive-queue thresholds, perform this task:

	Command	Purpose
Step 1
Step 1	Router(config)# interface tengigabitethernet	Selects the interface to configure.
	slot/port
Step 2
Step 2	Router(config-if)# rcv-queuedscp-mapqueue_#	Maps DSCP values to the standard receive queue
	threshold_# dscp1 [dscp2 [dscp3 [dscp4 [dscp5	thresholds.
	[dscp6 [dscp7 [dscp8]]]]]]]
	Router(config-if)#no rcv-queue dscp-map	Reverts to the default mapping.
Step 3
Step 3	Router(config-if)# end	Exits configuration mode.
Step 4
Step 4	Router# show queueing interface	Verifies the configuration.
	tengigabitethernet slot/port

When mapping DSCP values, note the following information:

•You can enter up to 8 DSCP values that map to a queue and threshold.

•You can enter multiple commands to map additional DSCP values to the queue and threshold.

•You must enter a separate command for each queue and threshold.

This example shows how to map the DSCP values 0 and 1 to threshold 1 in the standard receive queue for 10-Gigabit Ethernet port 6/1 port 6/1:

Router# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)# interface tengigabitethernet 6/1

Router(config-if)#rcv-queue dscp-map 1 1 0 1

Router(config-if)# end

Router#

	Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
42-100	OL-4266-08

Image 100

Cisco Systems OL-4266-08 Mapping Dscp Values to Standard Receive-Queue Thresholds, Reverts to the default mapping, 42-100

Contents

A P T E R 42-1Overview Port Types Supported by PFC QoS42-2 PFC QoS Feature Processing Overview 42-32shows traffic flow and PFC QoS features with a PFC3 42-43shows traffic flow and PFC QoS features with a PFC2 42-5Component Overview Ingress LAN Port PFC QoS Features42-6 Flowchart of Ingress LAN Port PFC QoS Features 42-7PFC and DFC QoS Features Port TrustIngress Congestion Avoidance These sections describe PFCs and DFCs as they relate to QoSSupported Policy Feature Cards PFC and DFC QoS Feature List and FlowchartFeature Supported Distributed Forwarding Cards42-10 Ingress PFC QoSInternal Dscp Values Initial Internal Dscp ValueFinal Internal Dscp Value 42-11PFC QoS Egress Port Features These sections describe PFC QoS egress port featuresPort-Based PFC QoS and VLAN-Based PFC QoS 42-12Egress CoS Values Flowchart of PFC QoS Egress LAN Port Features42-13 Egress Dscp Mutation with a PFC3 Egress ToS ByteEgress PFC QoS Interfaces Egress ACL Support for Remarked DscpMarking on Egress OSM Ports 42-15Understanding Classification and Marking Classification and Marking at Untrusted Ingress PortsIngress Classification and Marking at Trusted Ports 42-16Classification and Marking at Ingress OSM Ports Ingress Classification and Marking at Trust CoS LAN PortsIngress Classification and Marking at Trust Dscp Ports 42-1742-18 Policers Classification and Marking on the MsfcOverview of Policers These sections describe policersAggregate Policers 42-20Microflow Policers 42-21Ingress and Egress Buffers and Layer 2 CoS-Based Queues Understanding Port-Based Queue Types42-22 42-23 Ingress Queue Types 42-24Egress Queue Types 42-25Ingress Egress Queue Drop Module to Queue Type Mappings42-26 42-27 42-28 PFC QoS Global Settings Following global PFC QoS settings applyFeature Default Value = CoS Egress CoS set from final internal Dscp valuesDefault Values With PFC QoS Enabled Receive-Queue LimitsTransmit-Queue Limit s 42-30Bandwidth Allocation Ratios Default Drop-Threshold Percentages and CoS Value Mappings42-31 1q4t Receive Queues 1q2t Receive Queues42-32 1p1q0t Receive Queues 1p1q4t Receive Queues42-33 1p1q8t Receive Queues 42-341q8t Receive Queues 42-352q8t Receive Queues 42-368q4t Receive Queues Standard receive queue Threshold CoS Lowest priority11, 13, 15-17, 19, 21, 23 27, 29, 31, 33, 39, 41-4542-38 48-63 42-3942-40 2q2t Transmit Queues 8q8t Receive Queues42-41 1p2q2t Transmit Queues 42-421p3q8t Transmit Queues 42-431p7q4t Transmit Queues 42-4442-45 48-63 42-461p7q8t Transmit Queues Tail-drop 100% nonconfigurable42-47 1p3q1t Transmit Queues 42-481p2q1t Transmit Queues Default Values With PFC QoS Disabled42-49 General Guidelines 42-50Wrr-queue bandwidth except Gigabit Ethernet LAN ports PFC3 Guidelines42-51 PFC2 Guidelines 42-52Class Map Command Restrictions Policy Map Command RestrictionsPolicy Map Class Command Restrictions Supported Granularity for CIR and PIR Rate ValuesSupported Granularity for CIR and PIR Token Bucket Sizes 42-54IP Precedence and Dscp Values 42-55Enabling PFC QoS Globally Command Purpose42-56 Enables ignore port trust globally on the router Disables ignore port trust globally on the routerDefault Enabling Ignore Port TrustEnabling Queueing-Only Mode Configuring Dscp Transparency42-58 Enabling Microflow Policing of Bridged Traffic 42-59Enabling VLAN-Based PFC QoS on Layer 2 LAN Ports 42-60Creating Named Aggregate Policers Enabling Egress ACL Support for Remarked Dscp42-61 42-62 42-63 These sections describe PFC QoS policy configuration Configuring a PFC QoS Policy42-64 PFC QoS Policy Configuration Overview Protocol Numbered ACLs Extended ACLs Named ACLsIPv4 Yes 100 to 1300 to 2000 to IPv6 Yes named Yes 800 to Yes 900 to Supported only with PFC2 MAC LayerConfiguring Protocol-Independent MAC ACL Filtering Configuring MAC ACLs42-66 Enabling VLAN-Based MAC QoS Filtering 42-67Configuring MAC ACLs 42-68Configuring ARP ACLs for QoS Filtering 42-69Creating a Class Map Configuring a Class Map42-70 Configuring Filtering in a Class Map Optional Configures the class map to filter using an ACLClears the ACL configuration from the class map Class Map Filtering Guidelines and RestrictionsVerifying Class Map Configuration 42-72Configuring a Policy Map Policy Map Class Configuration Guidelines and RestrictionsCreating a Policy Map To create a policy map, perform this taskConfiguring Policy Map Class Actions Creating a Policy Map Class and Configuring Filtering42-74 Configuring the Policy Map Class Trust State Configuring Policy Map Class Marking42-75 Configuring Policy Map Class Policing Using a Named Aggregate PolicerConfiguring a Per-Interface Policer 42-7642-77 42-78 Verifying Policy Map Configuration To verify policy map configuration, perform this taskExits policy map class configuration mode Additional classes in the policy mapAttaching a Policy Map to an Interface To attach a policy map to an interface, perform this taskAttaches a policy map to the interface Removes the policy map from the interface42-81 Router# show policy-map interface fastethernet 5/36Configuring Egress Dscp Mutation on a PFC3 Configuring Named Dscp Mutation MapsTo configure a named Dscp mutation map, perform this task 42-82Attaching an Egress Dscp Mutation Map to an Interface Attaches an egress Dscp mutation map to the interfaceRemoves the egress Dscp mutation map from 42-8342-84 Configuring Ingress CoS Mutation Maps 42-85Mapping Received CoS Values to Internal Dscp Values Configuring Dscp Value Maps42-86 Configures a Dscp markdown map Configuring Dscp Markdown Values42-87 42-88 Mapping Internal Dscp Values to Egress CoS Values Configures the internal Dscp to egress CoS map42-89 Configuring the Trust State of Ethernet LAN and OSM Ports Configures the trust state of the portReverts to the default trust state untrusted 42-90Configuring the Ingress LAN Port CoS Value 42-91Configuring Standard-Queue Drop Threshold Percentages Configures the ingress LAN port CoS valueReverts to the default port CoS value 42-92Configuring a Tail-Drop Receive Queue 42-93Configuring a WRED-Drop and Tail-Drop Receive Queue Configuring a WRED-Drop Transmit Queue42-94 Configuring a WRED-Drop and Tail-Drop Transmit Queue 42-95Configuring 1q4t/2q2t Tail-Drop Threshold Percentages 42-96Configures the receive- and transmit-queue tail-drop Reverts to the default receive- and transmit-queueTail-drop thresholds 42-97Mapping QoS Labels to Queues and Drop Thresholds Configuring DSCP-Based Queue Mapping42-98 Configuring Ingress DSCP-Based Queue Mapping Configuring the Port to Trust DscpEnabling DSCP-Based Queue Mapping 42-99Reverts to the default mapping Mapping Dscp Values to Standard Receive-Queue ThresholdsMaps Dscp values to the standard receive queue 42-100Queueing interface command 42-101Maps Dscp values to a standard transmit-queue Mapping Dscp Values to Standard Transmit-Queue Thresholds42-102 Mapping Dscp Values to the Transmit Strict-Priority Queue 42-103Configuring CoS-Based Queue Mapping Mapping CoS Values to Standard Receive-Queue ThresholdsMaps CoS values to the standard receive queue 42-104Maps CoS values to a standard transmit-queue threshold Mapping CoS Values to Standard Transmit-Queue Thresholds42-105 Maps CoS values to the receive and transmit Mapping CoS Values to Strict-Priority Queues42-106 Maps CoS values to a tail-drop threshold 42-107Allocating Bandwidth Between Standard Transmit Queues 42-10842-109 Setting the Receive-Queue Size Ratio Reverts to the default size ratioSets the size ratio between the receive queues 42-110Configuring the Transmit-Queue Size Ratio Configures the queue size ratio between transmit queuesConfigures the strict priority queue size 42-111Access Layer Distribution and Core Interswitch LinksSample Network Design Overview 42-11242-113 Identify the Voice Signaling Traffic from an IP Phone Vvlan Identify the Voice Traffic from an IP Phone VvlanIdentify the SAP Traffic from the PC Dvlan 42-11442-115 Set dscp efAccepting the Traffic Priority Value on Interswitch Links 42-116Prioritizing Traffic on Interswitch Links 42-11742-118 Voice Strict Priority Voice signaling Queue 2, Threshold Traffic TypeCoS from DSCP-to-CoS map Output Queue 42-119Class map commands Using Policers to Limit the Amount of Traffic from a PC42-120 To monitor the policing operation, use these commands 42-121PFC QoS Glossary 42-12242-123 42-124