Extron electronic 68-1034-02 Rev. A Connections, Transmitter connections, Final installation

Installation and Operation, cont’d

Final installation

After testing and making any adjustments, do the following: 1. At the power outlet, unplug the power supply.

NOne power supply can power both the transmitter and the receiver, so only one unit needs a power supply.

2. Mount the transmitter or receiver into the wall box, and attach the supplied Decora faceplate to the unit, as shown in figure 2-11.

Connections

Transmitter connections

The rack-mountable transmitter is in a quarter rack width enclosure. The wall-mountable transmitter is in an enclosure that can be mounted in UL standard wall boxes with Decora®- style face plates.

Figure 2-12 shows the front panel of both DVI 201 Tx models. Figure 2-13 shows the rear panel of both models.

DVI 201 Tx Front Panel

DVI INPUT LOCAL OUTPUT

DVI 200 Tx Series

Wall Box

Wall opening is flush with edge of box.

Decora

Faceplate

INPU T

DVI

AUDI O IN

PARSSS-T23H2RU

Extron

DVI 201 A D

12

DVI 201 A D Tx Front Panel

INPUT

Figure 2-11 — Mounting the transmitter or receiver

3. At the power outlet, reconnect the power supply. This powers up both units.

DVI

AUDIO L+R

3

1

RS-232

PASS THRU

4	Rx
	Tx

Figure 2-12 — DVI 201 Tx front panel connectors

2-14 DVI 201 Tx/Rx • Installation and Operation DVI 201 Tx/Rx • Installation and Operation 2-15