Reference Information
Specifications
Video input and loop-through — transmitters
Number/signal type | 1 |
| @ 60 Hz max. resolution |
| 1 |
Connectors |
|
DVI 201 Tx/Rx | 2 |
DVI 201 A D Tx/Rx | 2 |
Interconnection between transmitter and receiver
Connectors | 2 |
| STP (shielded twisted pair) cables |
| connecting the transmitter and receiver |
Termination standards | TIA/EIA T 568A or T 568B. Pin |
| configurations for each standard are |
| available in the manual’s installation |
| chapter. |
Bit rate | 5 gigabits/second total (1.65 gigabits/ |
| second/color) |
Signal transmission distance |
|
1920x1200 @ 60 Hz (the highest resolution of the single link DVI
standard)
STP (shielded twisted pair cable) 125' (38 m)
CAT 5/5e/6 cable...... 100' (30 m)
HDTV (1080i or 720p) or 1024x768 @ 60 Hz
CAT 5/5e/6 or STP (shielded twisted pair) cable 200' (60 m)
NThe transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
Video output — receivers
Number/signal type | 1 |
| resolution |
Connectors |
|
DVI 201 Tx/Rx | 2 |
DVI 201 A D Tx/Rx | 2 |
Audio — DVI 201 A D Tx/Rx
Gain | Unbalanced output: 0 dB; |
| balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.10% @ 1 kHz at nominal level |
S/N | >85 dB at maximum output (unweighted) |
Stereo channel separation | >86 dB @ 1 kHz |
Audio input — DVI 201 A D Tx/Rx
Number/signal type |
|
DVI 201 A D Tx | 1 stereo, unbalanced |
DVI 201 A D Rx | 1 stereo, balanced/unbalanced |
Connectors |
|
DVI 201 A D Tx | (1) 3.5 mm mini audio jack (tip, ring, |
| sleeve) |
DVI 201 A D Rx | (1) 3.5 mm captive screw connector, 5 pole |
Impedance |
|
DVI 201 A D Tx | >10k ohms unbalanced, DC coupled |
DVI 201 A D Rx | >18k ohms unbalanced, 14k ohms |
| balanced, DC coupled |
Nominal level |
|
DVI 201 A D Tx | |
DVI 201 A D Rx | +4 dBu (1.23 Vrms) |
Maximum level |
|
DVI 201 A D Tx | +11 dBu, unbalanced at 1% THD+N |
DVI 201 A D Rx | +16.8 dBu, unbalanced at 1% THD+N |
N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — DVI 201 A D Tx/Rx
Number/signal type |
|
DVI 201 A D Tx | 1 stereo, balanced/unbalanced |
DVI 201 A D Rx | 1 stereo, unbalanced |
Connectors |
|
DVI 201 A D Tx | (1) 3.5 mm captive screw connector, 5 pole |
DVI 201 A D Rx | (1) 3.5 mm mini audio jack (tip, ring, |
| sleeve) |
Impedance |
|
DVI 201 A D Tx | 50 ohms unbalanced, 100 ohms balanced |
DVI 201 A D Rx | 50 ohms unbalanced |
DVI 201 Tx/Rx • Reference Information | DVI 201 Tx/Rx • Reference Information |
