Extron electronic 68-1034-02 Rev. A user manual Reference Information, cont’d, General

Reference Information, cont’d

Maximum level (Hi-Z)
DVI 201 A D Tx	>+16 dBu, balanced or unbalanced at
	1% THD+N
DVI 201 A D Rx	>+9.8 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)
DVI 201 A D Tx	>+9 dBm, balanced or unbalanced at
	1% THD+N
DVI 201 A D Rx	>+6.8 dBm, unbalanced at 1% THD+N

Control/remote — external device (pass-through)

Serial control port input
Transmitter	RS-232 via (1) 3.5 mm, 3 pole captive screw
	connector
Receiver	1 set of proprietary signals on a female
	RJ-45 jack
Serial control port output
Transmitter	1 set of proprietary signals on a female
	RJ-45 jack
Receiver	RS-232 via a 3.5 mm, 3 pole captive screw
	connector

NProtocol is mirrored between the transmitter and the receiver.

Serial control pin configurations. Captive screw connectors: 1 = TX, 2 = RX,

3 = GND

General

External power supply	100 VAC to 240 VAC, 50/60 Hz, 6 W max.,
	external; to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.4 A for both transmitter and
	receiver

NEach transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the CAT 5/5e/6 or STP (shielded twisted pair) cable.

Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) /
	10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) /
	10% to 90%, noncondensing
Cooling	Convection, unvented

Rack mount

DVI 201 TX, DVI 201 RX

Yes, with optional RSU 129 or RSB 129 1U 9.5"rack shelf, part #60-190-01 or

60-604-01; RSU 126 or RSB 126 1U 6" deep rack shelf, part #60-190-10, 60-604-10; RSF 123 or RSB 123 or VersaTools® 3.5"rack shelf, part #60-190-20 or 60‑604‑20.

Also furniture mountable with optional MBD 129 Through-Desk Mounting Kit, #70-077-02, or attachable to a projector mount using optional PMK 300 kit #70-374-01 or PMK 350 #70-526-02 or -03.

DVI 201 A D TX, DVI 201 A D RX

No, but wall or furniture mountable in a Decora -style opening

Enclosure type	Metal
Enclosure dimensions
DVI 201 Tx/Rx	1.0" H x 4.3" W x 3.0" D
	(quarter rack wide)
	2.5 cm H x 10.9 cm W x 7.6 cm D
	(Depth excludes connectors.)
DVI 201 A D Tx/Rx
Faceplate	2.6" H* x 1.3" W x 0.1" D
	(6.6 cm H* x 3.3 cm W x 0.3 cm D)
	(Fits the opening in a 1 gang Decora
	faceplate. *Height is 3.8" [9.7 cm] including
	mounting tabs.)
Buffer	2.7" H x 1.8" W x 0.75V D*
	(6.9 cm H x 4.6 cm W x 1.9 cm D*)
	(*Depth excludes connectors.)
Product weight	0.5 lbs (0.3 kg)
Shipping weight	3 lbs (2 kg)
Vibration	ISTA 1A in carton
	(International Safe Transit Association)
Listings	UL, CUL
Compliances	CE, FCC Class A**, VCCI, AS/NZS, ICES
MTBF	30,000 hours
Warranty	3 years parts and labor

N*An optional HDMI to DVI adapter is required if an HDMI signal is used. Also, an optional Extron HDMI-to-DVI adapter is required in order to transmit a CEC signal.

A-4 DVI 201 Tx/Rx • Reference Information DVI 201 Tx/Rx • Reference Information A-5