Extron electronic 68-1034-02 Rev. A Transmitter control and indicator, Receiver indicator

Installation and Operation, cont’d

1

INPUT

DVI

AUDIO L+R

RS-232

PASS THRU

Rx

Tx

DVI 201 A D Tx Transmitter Front Panel

Figure 2-27 — Decora power indicator

Transmitter control and indicator

A Power LED —

	DVI 201 Tx (non-Decora) — This front panel LED lights green
	to indicate that the unit is receiving power:
	DVI 201 A D Tx (Decora) — This two-color front panel LED
	lights to indicate signal and power status as follows:
	Amber — The unit is receiving power.
	Green — The unit is receiving power and a signal is present on
	the DVI input.
B	DDC Route switch (DVI 201 Tx ([non-Decora] only) —
	This rear panel switch selects either the remote or local DVI
	display as the route of the display resolution data (the display
	data channel [DDC]) and HDCP copyright decoding keys.

Receiver indicator

NBoth receiver models have power indicators in the same location as on the related transmitter model.

A Power LED —

DVI 201 Rx (non-Decora) — This front panel LED lights green to indicate that the unit is receiving power:

DVI 201 A D Rx (Decora) — This two-color front panel LED lights to indicate signal and power status as follows:

Amber — The unit is receiving power.

Green — The unit is receiving power and a signal is present on the TP input.

System operation

After the transmitter, the receiver, and their connected devices are powered up, the system is fully operational. If any problems are encountered, ensure all cables are routed and connected properly.

NEnsure that the video source and display selected for the DDC are properly connected to the transmitter/receiver pair, and that the transmitter, the receiver, and the display have power applied before power is applied to the video source. If all other devices are not turned on before the video source, the image may not appear.

2-28 DVI 201 Tx/Rx • Installation and Operation DVI 201 Tx/Rx • Installation and Operation 2-29