Cisco Systems OL-8555-02 manual Methods for Adding Phones to, Cisco Unified CallManager Database

Chapter 6 Viewing Model Information, Status, Statistics, and Security Information on the Cisco Unified IP Phone

Status Menu

Table 6-2 Status Messages on the Cisco Unified IP Phone 7940G/7960G

Message	Description	Possible Explanation and Action
BootP server used	The phone obtained its IP	None. This message is informational only.
	address from a BootP server
	rather than a DHCP server.
CFG file not found	The name-based and default	The configuration file for a phone is created
	configuration file was not	when the phone is added to the
	found on the TFTP Server.	Cisco Unified CallManager database. If the
		phone has not been added to the
		Cisco Unified CallManager database, the
		TFTP server generates a CFG File Not Found
		response.
		• Phone is not registered with
		Cisco Unified CallManager.
		You must manually add the phone to
		Cisco Unified CallManager if you are not
		allowing phones to auto-register. See the
		“Methods for Adding Phones to the
		Cisco Unified CallManager Database”
		section on page 2-11for details.
		• If you are using DHCP, verify that the
		DHCP server is pointing to the correct
		TFTP server.
		• If you are using static IP addresses, check
		configuration of the TFTP server. See the
		“Network Configuration Menu Options”
		section on page 4-3for details on
		assigning a TFTP server.
CFG TFTP Size Error	The configuration file is too	Power cycle the phone.
	large for file system on the
	phone.

	Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
OL-8555-02		6-5