Chapter 3 Network Configuration
Configuring Network Device Groups
Step 2 In the Network Device Groups table, click the name of the current group of the network device.
Step 3 In the AAA Clients table or AAA Servers table, as applicable, click the name of the client or server that you want to assign to a new NDG.
Step 4 From the Network Device Group list, select the NDG to which you want to reassign the network device.
Step 5 Click Submit.
The network device is assigned to the NDG you selected.
Editing a Network Device Group
You can rename an NDG, change the shared secret, and the key wrap configuration.
Caution When renaming an NDG, ensure that there are no NARs or other shared profile components (SPCs) that invoke the original NDG name. ACS performs no automatic checking to determine whether the original NDG is still invoked. If a user’s authentication request incorporates an SPC that invokes a nonexistent (or renamed) NDG, the attempt will fail and the user will be rejected.
To edit an NDG:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
Step 2 In the Network Device Groups table, click the NDG that you want to edit.
Tip If the Network Device Groups table does not appear, choose Interface Configuration > Advanced Options. Then, check the Network Device Groups check box.
Step 3 At the bottom of the page, click Edit Properties.
Step 4 Change the network device group properties as required. For more information about these properties, see Adding a Network Device Group, page
Step 5 Click Submit.
The NDG properties are changed.
User Guide for Cisco Secure Access Control Server
| ||
|
