Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems ONS 15327 manual 24 shows the External Alarms subtab

Models: ONS 15327

1 50

Download 50 pages 46.72 Kb

Page 42

Figure 3-24shows the External Alarms subtab.

3 Using Cisco Transport Controller

78-11719-02 July 2001

•Severity— Select a severity. The severity determines how the alarm displays in the CTC Alarms and History tabs and whether the LEDs activate. Critical, Major, and Minor activate the appropriate LEDs. Not Alarmed and Not Reported do not activate LEDs, but do report the information in CTC.

•Virtual Wire—Select the virtual wire that will carry the alarm signal (none or Virtual Wire 1– 4).

•Raised When—Select the contact condition (open or closed) that will trigger the alarm in CTC.

•Description— Default descriptions are provided for each alarm type; change the description as necessary. The description appears in Alarms tab view when the alarm is raised.

Step 5 To provision additional devices, complete Step 4 for each additional device.

Step 6 Click Apply.

Figure 3-24shows the External Alarms subtab.

Figure 3-24 The External Alarms subtab showing the XTC-28-3 card

3-42Cisco ONS 15327 User Documentation

Image 42

Cisco Systems ONS 15327 manual 24 shows the External Alarms subtab

Contents

3.1 Overview Using Cisco Transport ControllerC H A P T E R 3.2 Installing CTC Procedure Install Netscape Windows3.2.1 Preparing PCs to Run CTC Procedure Extracting the CTC Version 2.3 Files for Solaris Procedure Install Netscape Solaris3.2.2 Preparing Solaris Workstations to Run CTC Procedure Install the Java Files Solaris Step 4 Un-compress each patch ﬁle by typing Procedure Enable Applet Security for CTC e Check Enable DNS for Windows Resolution 3.3 Connecting PCs to the ONSProcedure Set Up a PC for Direct Connection 3.3.1 Direct Connectionsc Click Properties Click Specify an IP address Settings Procedure Disable Proxy Service Using Windows with Internet ExplorerProcedure Disable Proxy Service Using Windows with Netscape 3.3.2 LAN Connections3.3.3 Remote Access to the ONS 3.3.4 Connecting to the ONS 15327 with TL1 Terminals3.4 Logging into CTC Procedure Log into the CTC 3.5 Viewing CTCNode View Card Colors 3.5.1 Node ViewFigure 3-6 CTC in node view login default Card ColorNode View Tabs and Subtabs DescriptionSubtabs Figure 3-7 The CTC network view 3.5.2 Network ViewAlarm Status Node StatusSelected Area, Set Background Color, Set Background Image, Remove Procedure Set Up an Alternative Network Map3.5.2.1 Inserting an Alternative Network Topology Map Background ImageStep 2 Choose the General tab and uncheck Use Default Map Procedure Create a New Domain 3.5.2.2 Creating DomainsStep 2 Choose Create New Domain 3.5.3 Card View 3.5.4 CTC Navigation 3 Using Cisco Transport Controller78-11719-02 July3-20 Cisco ONS 15327 User Documentation 3.5.5 Table Data 3.5.6 Inventory Data 3-22 Cisco ONS 15327 User DocumentationLocation-The slot where the card is installed Column 3.6 Viewing ONS 15327 Alarms, Conditions, and EventsAlarm Data Description3.6.1 Controlling Alarm Display 3.6.2 Viewing Alarm History Figure 3-15 Viewing current-session alarms and events3.7 Setting Up General Node Information Procedure Set Up General Node InformationStep 2 Click the Provisioning General tabs Procedure Convert Coordinates to Degrees, Minutes, and Seconds 3.8 Setting Up General Network Information Procedure Set Up Network Information3.8.1 Changing the IP Address page ONS 15327 Security Levels 3.9 Setting Up ONS 15327 SecurityMaintenance CTC TabProcedure Create New Users Step 2 Click the Provisioning Security tabs Procedure Edit User Security Node LevelProcedure Edit User Security at the Network Level all nodes Click the Provisioning Security tabs3.10 Setting Up Protection Groups Procedure Create Protection Groups for Optical CardsProcedure Edit Protection Groups a Click the Maintenance Protection tabs 3.11 Setting Up TimingProcedure Delete Protection Groups Step 3 Click the Provisioning Protection tabsSynchronization Status Messaging SSM is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of the SONET Line layer. They enable SONET devices to automatically select the highest-quality timing reference and to avoid timing loops Procedure Set Up ONS 15327 Timing Sync Messaging- Check to enable SSM 3.12 Setting Up External User-Provisionable Alarms 3.12.1 Using Virtual Wires3.12.2 External Input Alarms Procedure Provision External AlarmsFigure 3-24 shows the External Alarms subtab Procedure Provision External Controls 3.12.3 External Output Controls3.13 Creating Alarm Proﬁles Example of the external alarm input and output processAlarm Proﬁles are created at the network view using the Provisioning Alarming tabs Figure 3-27. A default alarm proﬁle in the Default column is pre-provisioned and you use the Clone feature to create new proﬁles based on the default alarm proﬁle Procedure Create an Alarm Proﬁle Step 2 Click the Provisioning Alarming tabsStep 2 Click the Provisioning DS1 or DS3 Alarming tabs Procedure Apply an Alarm Proﬁle at the Card ViewProcedure Apply an Alarm Proﬁle at the Node View c Click Force still need to “Apply”3.14 Printing and Exporting CTC Data Procedure Print CTC Data Procedure Export CTC Dataﬁlename.csv 3.15 Displaying CTC Data in Other Applicationsﬁlename.htm ﬁlename.tsv