3 Using Cisco Transport Controller | |
Figure | Example of a customized map graphic |
Step 6 At the network view, fill the window with the desired map graphic:
(a)Click the Zoom Selected Area tool in the toolbar. The cursor arrow becomes a crosshair.
(b)Holding down the left button on your mouse, drag the crosshair diagonally across the area of the map that you want shown.
The view that appears becomes the default network map view for that particular
Step 7 From the menu bar, choose Edit > Preferences.
The Preference dialog box appears.
Step 8 Click the General tab.
Step 9 Use the down arrow and up arrow buttons to enter the correct longitudes and latitudes for the top, bottom, left, and right edges of the entire map graphic (not just the portion where you zoomed in).
Step 10 Click Apply and click OK.
3.5.2.2 Creating Domains
You can create domains for managing the display of multiple nodes on the
Procedure: Create a New Domain
Step 1
Step 2 Choose Create New Domain.
Step 3 Type a name for your domain.