Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems ONS 15327 manual Click Specify an IP address

Models: ONS 15327

1 50

Download 50 pages 46.72 Kb

Page 9

Click Specify an IP address.

78-11719-02 July 2001	Using Cisco Transport Controller 3
Step 5	Click Specify an IP address.
Step 6	In the IP Address ﬁeld, enter an IP address that is on the same subnet but not identical to
	the ONS 15327 (in the example the new IP address is 192.1.0.5). The last three digits
	must be between 1 and 254.
Step 7	Type 255.255.255.0 in the Subnet Mask ﬁeld.
Step 8	Click OK.
Step 9	(Windows 95/98) Click the Gateway tab (Figure 3-3).
Figure 3-3	The TCP/IP Properties dialog box – Gateway tab (Windows 95/98)

Step 10 This step deﬁnes the ONS 15327 as the default gateway for the PC. In the New Gateway ﬁeld (Windows 95/98) or Default Gateway ﬁeld (Windows NT), type the ONS 15327 IP address. For initial setup, this is the default address that ships with the ONS 15327 (192.1.0.2).

Step 11 Click Apply (Windows NT) or Add (Windows 95/98). For Windows 95/98, verify that the IP address displays in the Installed Gateways ﬁeld.

Step 12 You will be prompted to restart your PC. Click Yes.

Step 13 Test the connection:

(a)Start Netscape or Windows Explorer.

(b)Enter the ONS 15327 IP address in the Web address (URL) ﬁeld. Within 30 seconds, the CTC login screen displays. If it does not appear, continue with Steps c and d.

(c)From the Windows Start menu, choose MS-DOS prompt.

(d)At the DOS prompt, type ping [ONS 15327 IP address], for example, ping 192.1.0.2. If your computer is connected to the ONS 15327, a “ reply from [IP address]” message displays.

Cisco ONS 15327 User Documentation

3-9

Image 9

Cisco Systems ONS 15327 manual Click Specify an IP address

Contents

3.1 Overview Using Cisco Transport ControllerC H A P T E R 3.2 Installing CTC Procedure Install Netscape Windows3.2.1 Preparing PCs to Run CTC Procedure Extracting the CTC Version 2.3 Files for Solaris Procedure Install Netscape Solaris3.2.2 Preparing Solaris Workstations to Run CTC Procedure Install the Java Files Solaris Step 4 Un-compress each patch ﬁle by typing Procedure Enable Applet Security for CTC Procedure Set Up a PC for Direct Connection 3.3 Connecting PCs to the ONSe Check Enable DNS for Windows Resolution 3.3.1 Direct Connectionsc Click Properties Click Specify an IP address Procedure Disable Proxy Service Using Windows with Netscape Procedure Disable Proxy Service Using Windows with Internet ExplorerSettings 3.3.2 LAN Connections3.3.3 Remote Access to the ONS 3.3.4 Connecting to the ONS 15327 with TL1 Terminals3.4 Logging into CTC 3.5 Viewing CTC Procedure Log into the CTCFigure 3-6 CTC in node view login default 3.5.1 Node ViewNode View Card Colors Card ColorNode View Tabs and Subtabs DescriptionSubtabs Alarm Status 3.5.2 Network ViewFigure 3-7 The CTC network view Node Status3.5.2.1 Inserting an Alternative Network Topology Map Procedure Set Up an Alternative Network MapSelected Area, Set Background Color, Set Background Image, Remove Background ImageStep 2 Choose the General tab and uncheck Use Default Map Procedure Create a New Domain 3.5.2.2 Creating DomainsStep 2 Choose Create New Domain 3.5.3 Card View 3.5.4 CTC Navigation 3 Using Cisco Transport Controller78-11719-02 July3-20 Cisco ONS 15327 User Documentation 3.5.5 Table Data 3-22 Cisco ONS 15327 User Documentation 3.5.6 Inventory DataLocation-The slot where the card is installed Alarm Data 3.6 Viewing ONS 15327 Alarms, Conditions, and EventsColumn Description3.6.1 Controlling Alarm Display Figure 3-15 Viewing current-session alarms and events 3.6.2 Viewing Alarm History3.7 Setting Up General Node Information Procedure Set Up General Node InformationStep 2 Click the Provisioning General tabs Procedure Convert Coordinates to Degrees, Minutes, and Seconds 3.8 Setting Up General Network Information Procedure Set Up Network Information3.8.1 Changing the IP Address page Maintenance 3.9 Setting Up ONS 15327 SecurityONS 15327 Security Levels CTC TabProcedure Create New Users Procedure Edit User Security at the Network Level all nodes Procedure Edit User Security Node LevelStep 2 Click the Provisioning Security tabs Click the Provisioning Security tabsProcedure Create Protection Groups for Optical Cards 3.10 Setting Up Protection GroupsProcedure Edit Protection Groups Procedure Delete Protection Groups 3.11 Setting Up Timinga Click the Maintenance Protection tabs Step 3 Click the Provisioning Protection tabsSynchronization Status Messaging SSM is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of the SONET Line layer. They enable SONET devices to automatically select the highest-quality timing reference and to avoid timing loops Procedure Set Up ONS 15327 Timing Sync Messaging- Check to enable SSM 3.12.1 Using Virtual Wires 3.12 Setting Up External User-Provisionable AlarmsProcedure Provision External Alarms 3.12.2 External Input AlarmsFigure 3-24 shows the External Alarms subtab 3.12.3 External Output Controls Procedure Provision External ControlsExample of the external alarm input and output process 3.13 Creating Alarm ProﬁlesAlarm Proﬁles are created at the network view using the Provisioning Alarming tabs Figure 3-27. A default alarm proﬁle in the Default column is pre-provisioned and you use the Clone feature to create new proﬁles based on the default alarm proﬁle Step 2 Click the Provisioning Alarming tabs Procedure Create an Alarm ProﬁleProcedure Apply an Alarm Proﬁle at the Node View Procedure Apply an Alarm Proﬁle at the Card ViewStep 2 Click the Provisioning DS1 or DS3 Alarming tabs c Click Force still need to “Apply”3.14 Printing and Exporting CTC Data Procedure Export CTC Data Procedure Print CTC Dataﬁlename.htm 3.15 Displaying CTC Data in Other Applicationsﬁlename.csv ﬁlename.tsv