Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems ONS 15327 manual External Input Alarms, Procedure Provision External Alarms

Models: ONS 15327

1 50

Download 50 pages 46.72 Kb

Page 41

3.12.2 External Input Alarms

78-11719-02 July 2001		Using Cisco Transport Controller 3
Figure 3-23	Example of external alarms and controls in a virtual wire conﬁguration
	Smoke	Bell
	Smoke
	detector
		Virtual Wire #1 is
		external control
		trigger

Virtual Wire #1

Virtual Wire #1

ONS 15327

Node 1

	Smoke	Smoke
	Smoke	detector
	detector	detector
	detector
	ONS 15327	ONS 15327
	Node 4	Node 2

ONS 15327

Node 3

Virtual Wire #1

Virtual Wire #1

Smoke detector

=External alarm

=External control

55002

3.12.2 External Input Alarms

Use external alarms for sensors such as open doors, temperature sensors, ﬂood sensors, and other environmental conditions.

Procedure: Provision External Alarms

Step 1 Wire the external-device relays to the Alarm RJ-45 connector on the MIC.

Step 2 Log into CTC and display the working XTC card in card view.

Step 3 Click the External Alarms subtab (Figure 3-24).

Step 4 Complete the following ﬁelds for each external device wired to the RJ-45 connector on the MIC card:

•Enabled— Click the box to activate the ﬁelds for the corresponding alarm input number.

•Alarm Type— Select an alarm type from the list provided.

Cisco ONS 15327 User Documentation

3-41

Image 41

Cisco Systems ONS 15327 manual External Input Alarms, Procedure Provision External Alarms

Contents

C H A P T E R 3.1 OverviewUsing Cisco Transport Controller 3.2.1 Preparing PCs to Run CTC 3.2 Installing CTCProcedure Install Netscape Windows 3.2.2 Preparing Solaris Workstations to Run CTC Procedure Extracting the CTC Version 2.3 Files for SolarisProcedure Install Netscape Solaris Procedure Install the Java Files Solaris Step 4 Un-compress each patch ﬁle by typing Procedure Enable Applet Security for CTC Procedure Set Up a PC for Direct Connection 3.3 Connecting PCs to the ONSe Check Enable DNS for Windows Resolution 3.3.1 Direct Connectionsc Click Properties Click Specify an IP address Procedure Disable Proxy Service Using Windows with Netscape Procedure Disable Proxy Service Using Windows with Internet ExplorerSettings 3.3.2 LAN Connections3.4 Logging into CTC 3.3.3 Remote Access to the ONS3.3.4 Connecting to the ONS 15327 with TL1 Terminals 3.5 Viewing CTC Procedure Log into the CTCFigure 3-6 CTC in node view login default 3.5.1 Node ViewNode View Card Colors Card ColorSubtabs Node View Tabs and SubtabsDescription Alarm Status 3.5.2 Network ViewFigure 3-7 The CTC network view Node Status3.5.2.1 Inserting an Alternative Network Topology Map Procedure Set Up an Alternative Network MapSelected Area, Set Background Color, Set Background Image, Remove Background ImageStep 2 Choose the General tab and uncheck Use Default Map Step 2 Choose Create New Domain Procedure Create a New Domain3.5.2.2 Creating Domains 3.5.3 Card View 3-20 Cisco ONS 15327 User Documentation 3.5.4 CTC Navigation3 Using Cisco Transport Controller78-11719-02 July 3.5.5 Table Data 3-22 Cisco ONS 15327 User Documentation 3.5.6 Inventory DataLocation-The slot where the card is installed Alarm Data 3.6 Viewing ONS 15327 Alarms, Conditions, and EventsColumn Description3.6.1 Controlling Alarm Display Figure 3-15 Viewing current-session alarms and events 3.6.2 Viewing Alarm HistoryStep 2 Click the Provisioning General tabs 3.7 Setting Up General Node InformationProcedure Set Up General Node Information Procedure Convert Coordinates to Degrees, Minutes, and Seconds 3.8.1 Changing the IP Address 3.8 Setting Up General Network InformationProcedure Set Up Network Information page Maintenance 3.9 Setting Up ONS 15327 SecurityONS 15327 Security Levels CTC TabProcedure Create New Users Procedure Edit User Security at the Network Level all nodes Procedure Edit User Security Node LevelStep 2 Click the Provisioning Security tabs Click the Provisioning Security tabsProcedure Create Protection Groups for Optical Cards 3.10 Setting Up Protection GroupsProcedure Edit Protection Groups Procedure Delete Protection Groups 3.11 Setting Up Timinga Click the Maintenance Protection tabs Step 3 Click the Provisioning Protection tabsSynchronization Status Messaging SSM is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of the SONET Line layer. They enable SONET devices to automatically select the highest-quality timing reference and to avoid timing loops Procedure Set Up ONS 15327 Timing Sync Messaging- Check to enable SSM 3.12.1 Using Virtual Wires 3.12 Setting Up External User-Provisionable AlarmsProcedure Provision External Alarms 3.12.2 External Input AlarmsFigure 3-24 shows the External Alarms subtab 3.12.3 External Output Controls Procedure Provision External ControlsExample of the external alarm input and output process 3.13 Creating Alarm ProﬁlesAlarm Proﬁles are created at the network view using the Provisioning Alarming tabs Figure 3-27. A default alarm proﬁle in the Default column is pre-provisioned and you use the Clone feature to create new proﬁles based on the default alarm proﬁle Step 2 Click the Provisioning Alarming tabs Procedure Create an Alarm ProﬁleProcedure Apply an Alarm Proﬁle at the Node View Procedure Apply an Alarm Proﬁle at the Card ViewStep 2 Click the Provisioning DS1 or DS3 Alarming tabs c Click Force still need to “Apply”3.14 Printing and Exporting CTC Data Procedure Export CTC Data Procedure Print CTC Dataﬁlename.htm 3.15 Displaying CTC Data in Other Applicationsﬁlename.csv ﬁlename.tsv