Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems ONS 15327 manual Procedure Edit Protection Groups

Models: ONS 15327

1 50

Download 50 pages 46.72 Kb

Page 35

Procedure: Edit Protection Groups

78-11719-02 July 2001

Using Cisco Transport Controller 3

•Reversion time—if Revertive is checked, enter the amount of time following a corrected failure condition that the ONS 15327 should switch back to the working port.

Step 7 Click OK.

Note The default XTCPROTGRP provides XTC-level protection for DS-1 and DS-3 ports. It is non-revertive and cannot be modiﬁed or deleted.

Procedure: Edit Protection Groups

Step 1 Display the CTC node view.

Step 2 Click the Provisioning > Protection tabs (Figure 3-20).

Figure 3-20 Editing and deleting protection groups in the Protection subtab

Step 3 Under Protection Groups, choose a protection group.

Step 4 Under Selected Group, edit the ﬁelds as appropriate. (For ﬁeld descriptions, see the “Create Protection Groups for Optical Cards” section on page 3-34.)

Step 5 Click Apply.

Cisco ONS 15327 User Documentation

3-35

Image 35

Cisco Systems ONS 15327 manual Procedure Edit Protection Groups

Contents

C H A P T E R 3.1 OverviewUsing Cisco Transport Controller 3.2.1 Preparing PCs to Run CTC 3.2 Installing CTCProcedure Install Netscape Windows 3.2.2 Preparing Solaris Workstations to Run CTC Procedure Extracting the CTC Version 2.3 Files for SolarisProcedure Install Netscape Solaris Procedure Install the Java Files Solaris Step 4 Un-compress each patch ﬁle by typing Procedure Enable Applet Security for CTC 3.3.1 Direct Connections 3.3 Connecting PCs to the ONSProcedure Set Up a PC for Direct Connection e Check Enable DNS for Windows Resolutionc Click Properties Click Specify an IP address 3.3.2 LAN Connections Procedure Disable Proxy Service Using Windows with Internet ExplorerProcedure Disable Proxy Service Using Windows with Netscape Settings3.4 Logging into CTC 3.3.3 Remote Access to the ONS3.3.4 Connecting to the ONS 15327 with TL1 Terminals 3.5 Viewing CTC Procedure Log into the CTCCard Color 3.5.1 Node ViewFigure 3-6 CTC in node view login default Node View Card ColorsSubtabs Node View Tabs and SubtabsDescription Node Status 3.5.2 Network ViewAlarm Status Figure 3-7 The CTC network viewBackground Image Procedure Set Up an Alternative Network Map3.5.2.1 Inserting an Alternative Network Topology Map Selected Area, Set Background Color, Set Background Image, RemoveStep 2 Choose the General tab and uncheck Use Default Map Step 2 Choose Create New Domain Procedure Create a New Domain3.5.2.2 Creating Domains 3.5.3 Card View 3-20 Cisco ONS 15327 User Documentation 3.5.4 CTC Navigation3 Using Cisco Transport Controller78-11719-02 July 3.5.5 Table Data 3-22 Cisco ONS 15327 User Documentation 3.5.6 Inventory DataLocation-The slot where the card is installed Description 3.6 Viewing ONS 15327 Alarms, Conditions, and EventsAlarm Data Column3.6.1 Controlling Alarm Display Figure 3-15 Viewing current-session alarms and events 3.6.2 Viewing Alarm HistoryStep 2 Click the Provisioning General tabs 3.7 Setting Up General Node InformationProcedure Set Up General Node Information Procedure Convert Coordinates to Degrees, Minutes, and Seconds 3.8.1 Changing the IP Address 3.8 Setting Up General Network InformationProcedure Set Up Network Information page CTC Tab 3.9 Setting Up ONS 15327 SecurityMaintenance ONS 15327 Security LevelsProcedure Create New Users Click the Provisioning Security tabs Procedure Edit User Security Node LevelProcedure Edit User Security at the Network Level all nodes Step 2 Click the Provisioning Security tabsProcedure Create Protection Groups for Optical Cards 3.10 Setting Up Protection GroupsProcedure Edit Protection Groups Step 3 Click the Provisioning Protection tabs 3.11 Setting Up TimingProcedure Delete Protection Groups a Click the Maintenance Protection tabsSynchronization Status Messaging SSM is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of the SONET Line layer. They enable SONET devices to automatically select the highest-quality timing reference and to avoid timing loops Procedure Set Up ONS 15327 Timing Sync Messaging- Check to enable SSM 3.12.1 Using Virtual Wires 3.12 Setting Up External User-Provisionable AlarmsProcedure Provision External Alarms 3.12.2 External Input AlarmsFigure 3-24 shows the External Alarms subtab 3.12.3 External Output Controls Procedure Provision External ControlsExample of the external alarm input and output process 3.13 Creating Alarm ProﬁlesAlarm Proﬁles are created at the network view using the Provisioning Alarming tabs Figure 3-27. A default alarm proﬁle in the Default column is pre-provisioned and you use the Clone feature to create new proﬁles based on the default alarm proﬁle Step 2 Click the Provisioning Alarming tabs Procedure Create an Alarm Proﬁlec Click Force still need to “Apply” Procedure Apply an Alarm Proﬁle at the Card ViewProcedure Apply an Alarm Proﬁle at the Node View Step 2 Click the Provisioning DS1 or DS3 Alarming tabs3.14 Printing and Exporting CTC Data Procedure Export CTC Data Procedure Print CTC Dataﬁlename.tsv 3.15 Displaying CTC Data in Other Applicationsﬁlename.htm ﬁlename.csv