Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems ONS 15327 manual Procedure Create New Users

Models: ONS 15327

1 50

Download 50 pages 46.72 Kb

Page 32

Procedure: Create New Users

3 Using Cisco Transport Controller

78-11719-02 July 2001

Note For users to gain access to multiple nodes, the same user name and password must exist on each node.

Security levels also limit the amount of time you can leave the system idle before the CTC window is locked to prevent unauthorized users from making changes. Higher security levels have shorter idle times. Table 3-12shows CTC security levels and their idle times.

Table 3-12	ONS 15327 Security Idle Times

Security Level		Idle Time

Retrieve		Unlimited

Maintenance		60 minutes

Provisioning		30 minutes

Superuser		15 minutes

Procedure: Create New Users

Step 1 From the CTC node view or network view, click the Provisioning tab.

Step 2 Click the Security subtab.

Step 3 On the Security pane, click Create.

Users created at the network view are given access (added) to all nodes on the network.

Step 4 In the Create User dialog box enter the following:

•Name— type the user name.

•Password—type the user password. The password must contain at least six characters and can be any letter or number (a-z, A-Z, 0-9).

•Conﬁrm Password —type the password again to conﬁrm it.

•Security Level—Select the user’s security level.

Step 5 Click OK.

Figure 3-18 Assigning a security level in the Create User dialog box

3-32Cisco ONS 15327 User Documentation

Image 32

Cisco Systems ONS 15327 manual Procedure Create New Users

Contents

C H A P T E R 3.1 OverviewUsing Cisco Transport Controller 3.2.1 Preparing PCs to Run CTC 3.2 Installing CTCProcedure Install Netscape Windows 3.2.2 Preparing Solaris Workstations to Run CTC Procedure Extracting the CTC Version 2.3 Files for SolarisProcedure Install Netscape Solaris Procedure Install the Java Files Solaris Step 4 Un-compress each patch ﬁle by typing Procedure Enable Applet Security for CTC 3.3 Connecting PCs to the ONS Procedure Set Up a PC for Direct Connectione Check Enable DNS for Windows Resolution 3.3.1 Direct Connectionsc Click Properties Click Specify an IP address Procedure Disable Proxy Service Using Windows with Internet Explorer Procedure Disable Proxy Service Using Windows with NetscapeSettings 3.3.2 LAN Connections3.4 Logging into CTC 3.3.3 Remote Access to the ONS3.3.4 Connecting to the ONS 15327 with TL1 Terminals Procedure Log into the CTC 3.5 Viewing CTC3.5.1 Node View Figure 3-6 CTC in node view login defaultNode View Card Colors Card ColorSubtabs Node View Tabs and SubtabsDescription 3.5.2 Network View Alarm StatusFigure 3-7 The CTC network view Node StatusProcedure Set Up an Alternative Network Map 3.5.2.1 Inserting an Alternative Network Topology MapSelected Area, Set Background Color, Set Background Image, Remove Background ImageStep 2 Choose the General tab and uncheck Use Default Map Step 2 Choose Create New Domain Procedure Create a New Domain3.5.2.2 Creating Domains 3.5.3 Card View 3-20 Cisco ONS 15327 User Documentation 3.5.4 CTC Navigation3 Using Cisco Transport Controller78-11719-02 July 3.5.5 Table Data 3.5.6 Inventory Data 3-22 Cisco ONS 15327 User DocumentationLocation-The slot where the card is installed 3.6 Viewing ONS 15327 Alarms, Conditions, and Events Alarm DataColumn Description3.6.1 Controlling Alarm Display 3.6.2 Viewing Alarm History Figure 3-15 Viewing current-session alarms and eventsStep 2 Click the Provisioning General tabs 3.7 Setting Up General Node InformationProcedure Set Up General Node Information Procedure Convert Coordinates to Degrees, Minutes, and Seconds 3.8.1 Changing the IP Address 3.8 Setting Up General Network InformationProcedure Set Up Network Information page 3.9 Setting Up ONS 15327 Security MaintenanceONS 15327 Security Levels CTC TabProcedure Create New Users Procedure Edit User Security Node Level Procedure Edit User Security at the Network Level all nodesStep 2 Click the Provisioning Security tabs Click the Provisioning Security tabs3.10 Setting Up Protection Groups Procedure Create Protection Groups for Optical CardsProcedure Edit Protection Groups 3.11 Setting Up Timing Procedure Delete Protection Groupsa Click the Maintenance Protection tabs Step 3 Click the Provisioning Protection tabsSynchronization Status Messaging SSM is a SONET protocol that communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of the SONET Line layer. They enable SONET devices to automatically select the highest-quality timing reference and to avoid timing loops Procedure Set Up ONS 15327 Timing Sync Messaging- Check to enable SSM 3.12 Setting Up External User-Provisionable Alarms 3.12.1 Using Virtual Wires3.12.2 External Input Alarms Procedure Provision External AlarmsFigure 3-24 shows the External Alarms subtab Procedure Provision External Controls 3.12.3 External Output Controls3.13 Creating Alarm Proﬁles Example of the external alarm input and output processAlarm Proﬁles are created at the network view using the Provisioning Alarming tabs Figure 3-27. A default alarm proﬁle in the Default column is pre-provisioned and you use the Clone feature to create new proﬁles based on the default alarm proﬁle Procedure Create an Alarm Proﬁle Step 2 Click the Provisioning Alarming tabsProcedure Apply an Alarm Proﬁle at the Card View Procedure Apply an Alarm Proﬁle at the Node ViewStep 2 Click the Provisioning DS1 or DS3 Alarming tabs c Click Force still need to “Apply”3.14 Printing and Exporting CTC Data Procedure Print CTC Data Procedure Export CTC Data3.15 Displaying CTC Data in Other Applications ﬁlename.htmﬁlename.csv ﬁlename.tsv