Cisco Systems CB21AG, PI21AG manual Setup Type Window

Installing or Upgrading Client Adapter Software

Figure 3 Setup Type Window

Step 13 Choose one of the following options and click Next:

Note To ensure compatibility among software components, Cisco recommends that you install the client utilities and driver.

•Install Client Utilities and Driver—Installs the client adapter driver and client utilities.

• Install Driver Only—Installs only the client adapter driver. If you choose this option, click Next and go to Step 25.

•Make Driver Installation Diskette(s)—Enables you to create driver installation diskettes that can be used to install drivers using the Windows Device Manager.

Note If you choose one of the first two options and a client adapter is not inserted into your computer, the following message appears: “The device may not be present or could have been ejected/unplugged from the system. Insert or reinsert it now.” Insert the client adapter and click OK. If you proceed without the client adapter inserted, the installation continues, but the driver installation is incomplete. You must manually install the driver later using the Update Device Driver Wizard. See Chapter 9 of the Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide (OL-4211-04) for instructions.

Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 2.5

OL-8008-01 11