Cisco Systems RPS 675 - page 50

Chapter 2 Installation

Connecting the RPS 675

2-16

Cisco RPS 675 Redundant Power System Hardware Installation Guide

78-15201-04

Figure 2-6 Connecting the Cable to the RPS 675

Warning

Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.

Statement 100C

Step 3 Connect the other end of the RPS connector cable to the RPS receptacle on

the switch.

Step 4 Repeat Step 2 through Step 3 for each switch that the RPS 675 will support.

Step 5 Connect all supported devices to an AC power source.

Note The RPS 675 is designed to provide backup for internal power supply

failures of connected device power supplies. It is not designed to act as a

backup power source that protects against losses of power due to external

power outages. We recommend using an uninterruptable power system

(UPS) as protection against power outages.

Step 6 If the RPS is not already connected to AC power, connect the AC power cable to

the RPS 675 as shown in Figure 2-7, and connect the other end of the power cable

to an AC power source.

100-240V~

10-6A

50/60Hz

DC OUTPUT 1 DC OUTPUT 2 DC OUTPUT 3 DC OUTPUT 4 DC OUTPUT 5 DC OUTPUT 6

12V /25A, -48V /7.8A MAX OUTPUTCAUTION: RPS NOT HOT PLUGGABLE

86669

Contents

Main Page Page Page CONTENTS Page Page Page Cisco Limited Lifetime Hardware Warranty Terms Page Page Page Preface Audience Purpose Organization Conventions xv Statement 1071Warning Definition xvi xvii xviii xix xx Page Page Related Publications Obtaining Documentation and Submitting a Service Request Product Overview Features Front-Panel Description LEDs 1 2 3 4 5 Page Standby/Active Button Page Rear-Panel Description Deployment Strategies Page Installation Preparing for Installation 2-2 Warnings These warnings are translated into several languages in Appendix C, Translated Safety Warnings. 2-3 EMC Regulatory Statements U.S.A. Statement 257Class A Notice for Taiwan and Other Traditional Chinese Markets 2-5 Statement 191VCCI Class A Warning for Japan Statement 294Class A Warning for Korea Statement 256Class A Warning for Hungary Site Requirements Verifying the Package Contents Installing the Switch Table or Shelf-Mounting Rack-Mounting Planning Your Rack-Mount Installation Tools and Equipment Required Attaching the Brackets to the RPS Page Chapter 2 Installation Installing the Switch 2-12 Cisco RPS 675 Redundant Power System Hardware Installation Guide 78-15201-04 Figure 2-2 Attaching Brackets for 19-Inch Racks (Rear Panel Forward) Figure 2-3 Attaching Brackets for 24-Inch Racks (Front Panel Forward) DC OUTPUT 6 Page Mounting the RPS in a Rack Connecting the RPS 675 Page Page Page Page Troubleshooting Page A Technical Specifications Page B Connector and Cable Specifications Page C Translated Safety Warnings C-2 Statement 17BOvertemperature Warning C-3 Page C-5 Statement 43Jewelry Removal Warning C-6 C-7 Statement 48Stacking the Chassis Warning C-8 C-9 Statement 100CAttaching the Cisco RPS (model PWR675-AC-RPS-N1) C-10 Statement 265Redundant Power Supply Connection Warning C-11 C-12 Statement 1001Work During Lightning Activity C-13 Statement 1004Installation Instructions C-14 C-15 Statement 1006Chassis Warning for Rack-Mounting and Servicing C-16 C-17 C-18 C-19 C-20 Page Page Page Page C-25 Statement 1017Restricted Area C-26 Page C-28 Statement 1019Main Disconnecting Device C-29 C-30 Statement 1024Ground Conductor C-31 Page Page C-34 Statement 1030Equipment Installation C-35 C-36 Statement 1040Product Disposal C-37 C-38 Statement 1073No User-Serviceable Parts C-39 Page C-41 Statement 1074Comply with Local and National Electrical Codes Page INDEX Numerics A B E F G H R S T V