Chapter 1 Product Overview
Rear-Panel Description
1-8
Cisco RPS 675 Redundant Power System Hardware Installation Guide
78-15201-04
Rear-Panel Description
The RPS 675 rear panel has an AC power input connector and six DC output
connectors (numbered 1 to 6) to connect to supported devices. (See Figure 1-4).
Figure 1-4 RPS 675 Rear Panel
Use the supplied AC power cord to connect to an AC power outlet.
The DC output connectors require a Cisco 16-pin-to-14-pin cable
(CAB-RPS-1614=) to connect to supported devices. (One cable is supplied with
the RPS; you can order additional cables separately.) The 16-pin connector plugs
into the RPS, and the 14-pin connector plugs into the device. Use only the Cisco
cable for this connection.
Warning
Attach only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) to the RPS
receptacle.
Statement 100C
1AC input connector 3Fan exhaust
2DC output connectors
100-240V~
10-6A
50/60Hz
DC OUTPUT 1 DC OUTPUT 2 DC OUTPUT 3 DC OUTPUT 4 DC OUTPUT 5 DC OUTPUT 6
12V /12A, -48 / 7.8A MAX OUTPUT
86664
2
1
3
CAUTION: RPS NOT HOT PLUGGABLE