Implementing NTP on Cisco IOS XR Software
How to Implement NTP on Cisco IOS XR Software
If the source IP address matches the access lists for more than one access type, the first type is granted. If no access groups are specified, all access types are granted to all systems. If any access groups are specified, only the specified access types are granted.
For details on NTP control queries, see RFC 1305 (NTP version 3).
SUMMARY STEPS
1.configure
2.ntp
3.access-group {peer query-only serve serve-only} access-list-name
4.end or commit
DETAILED STEPS
| Command or Action | Purpose |
Step 1 |
|
|
configure | Enters global configuration mode. | |
| Example: |
|
| RP/0/RP0/CPU0:router# configure |
|
Step 2 |
|
|
ntp | Enters NTP configuration mode. | |
| Example: |
|
| RP/0/RP0/CPU0:router(config)# ntp |
|
|
|
|
Cisco IOS XR System Management Configuration Guide
