Implementing NTP on Cisco IOS XR Software
How to Implement NTP on Cisco IOS XR Software
Configuring the System as an Authoritative NTP Server
This task explains how to configure the router as an authoritative NTP server.
You can configure the router to act as an authoritative NTP server, even if the system is not synchronized to an outside time source
Note No specific command enables NTP; the first NTP configuration command that you issue enables NTP.
SUMMARY STEPS
1.configure
2.ntp
3.master stratum
4.end or commit
DETAILED STEPS
| Command or Action | Purpose |
Step 1 |
|
|
configure | Enters global configuration mode. | |
| Example: |
|
| RP/0/RP0/CPU0:router# configure |
|
Step 2 |
|
|
ntp | Enters NTP configuration mode. | |
| Example: |
|
| RP/0/RP0/CPU0:router(config)# ntp |
|
|
|
|
Cisco IOS XR System Management Configuration Guide
