Cisco Systems SMC-169 Configuring NTP Authentication, configure 2. ntp 3. authenticate, SMC-178

Implementing NTP on Cisco IOS XR Software

How to Implement NTP on Cisco IOS XR Software

Configuring NTP Authentication

This task explains how to configure NTP authentication.

Note No specific command enables NTP; the first NTP configuration command that you issue enables NTP.

NTP Authentication

The encrypted NTP authentication scheme should be used when a reliable form of access control is required. Unlike the access-list-based restriction scheme that is based on IP addresses, the encrypted authentication scheme uses authentication keys and an authentication process to determine if NTP synchronization packets sent by designated peers or servers on a local network are deemed as trusted, before the time information that it carries along is accepted.

The authentication process begins from the moment an NTP packet is created. Cryptographic checksum keys are generated using the MD5 Message Digest Algorithm and are embedded into the NTP synchronization packet that is sent to a receiving client. When a packet is received by a client, its cryptographic checksum key is decrypted and checked against a list of trusted keys. If authentication is enabled and a key is trusted, the system is allowed to sync to the server that uses this key in its packets.

It is important to note that the encryption and decryption processes used in NTP authentication can be very CPU-intensive and can seriously degrade the accuracy of the time that is propagated within a network. If your network setup permits a more comprehensive model of access control, you should consider the use of the access-list-based form of control instead.

After NTP authentication is properly configured, your networking device only synchronizes with and provides synchronization to trusted time sources.

SUMMARY STEPS

1.configure

2.ntp

3.authenticate

4.authentication-key key-numbermd5 [clear encrypted] key-name

5.trusted-key key-number

6.end or commit

Cisco IOS XR System Management Configuration Guide

SMC-178