Cisco Systems UBR904 Cisco uBR904 Cable Modem Installation Checklist, Task, Verified by Date

Cisco uBR904 Cable Modem Installation Checklist

Note If an error message is displayed on the uBR904, you can find its explanation in the Cisco Cable CPE Error Messages book, viewable online at www.cisco.com/univercd/cc/td/doc/product/cable/cab_modm/ubcmerrs.pdf .

Cisco uBR904 Cable Modem Installation Checklist

To assist you with your installation and to provide a historical record of what was done and by whom, use the Cisco uBR904 Cable Modem Installation Checklists in Table 2-3and Table 2-4.Make a copy of this checklist and indicate when each procedure or verification is completed. When the checklist is completed, place it in your site log (described at the end of this chapter) along with the other records for your new Cisco uBR904 cable modem.

Table 2-3 Cisco uBR904 Cable Modem Installation Site Checklist

Installation Site Information

Subscriber’s Name:

Address:

Service account number:

Serial number and MAC address of Cisco uBR904 cable modem:

Personal computer make and model number:

Network interface card type:

Table 2-4 Cisco uBR904 Cable Modem Installation Task Checklist

Task Verified by Date

Date Cisco uBR904 cable modem delivered to installation site

Cable modem and all accessories unpacked

Safety recommendations and guidelines reviewed

Installation Checklist copied

Site log established and background information entered

Site power voltages verified

Existing coaxial cable at the installation site inspected and replaced, if necessary

Personal computer hardware, software, and configuration meet site requirements

Site environmental specifications verified

Required passwords, IP addresses, and so on, available

Required tools available

Power cable connected to AC source

Preparing for Installation 2-15